How many foot-pounds of torque does a Honda Civic have?
LX and Sport models come standard with a four-cylinder, 2.0-liter engine that produces 158 horsepower and 138 pound-feet of torque.
How much torque does a cylinder head have?
Mark each head bolt and head with aligning marks. Tighten each bolt 1/4 turn (90 degrees). For each cylinder head, start with head bolt numbered one. In increasing number sequence (1-2-3-4), tighten the head bolt in four stages. 1. Tighten each bolt to 7-9 foot pounds of torque. 2. Tighten each bolt to 12-15 foot pounds of torque.
How to tighten a cylinder head torque sequence?
Cylinder head torque sequence ’99-‘00 Install the new cylinder head bolts. Tighten the cylinder head bolts a first pass to 44 ft lb (60 Nm). Tighten the cylinder head bolts in sequence an additional 95 degrees.
What are the torque specs for a 5.3L V8?
Need in Detail on the Torque Specs for a 5.3l Head torque specs? Need in detail on the torque specs for a 5.3l v8 with fuel saver heads. have the same problem? I attached the sequence and the torque spec for installing the head. Make sure you use only new bolts. These are TTY or torque to yield bolts. helpful?
What are the torque specs for a M11?
Tighten the cylinder head bolts. Bolt 10 and 9 are different / shorter and have a different spec when tightening 1. Tighten the M11 cylinder head bolts?1-10 a first pass in sequence to 22?Lb?Ft. 2. Tighten the M11 cylinder head bolts?1-10 a second pass in sequence to 90? Degrees using J 45059 angle meter. 3.
What are the torque specs on a Honda Civic?
This article applies to the Honda Civic (incl. Del Sol) (1992-2000). Tightening your bolts too much or not enough can cause a part to fail, and depending on the part, can put your life and the lives of the any passengers in danger. Most parts come with bolt-tightening torque specs, and your owner’s manual should have this information too.
What causes torque wrench to snap on Honda Civic?
Typically, you can feel it in your torque wrench if you’ve overtightened or stretched a bolt too far. An overtightened bolt will suddenly takes less effort to turn the bolt. When this happens, the head can often snap off, which means deal with an extremely tight bolt that can’t simply be unscrewed.
When to use new bolts on Honda Civic?
Manufacturers design bolts and screws to “stretch” when they’re install. That way, the bolt and screw threads firmly attach to the matching threaded hole or nut. This lowers or outright eliminates the risk that the bolt or screw will work itself loose. For the same reason it’s always a good idea to use new bolts when working on the engine.
What can cause a Honda Civic to crack?
Not following the prescribed pattern risks having a wheel with loose lug nuts. Another example is the intake manifold. It can crack if the engine’s bolts aren’t tightened in the proper pattern. Most owners manuals include information about the order in which to tighten bolts and screws during reassembly.