Can you use ATF in Harley primary?
We submit that ATF is too thin for Harley primary use. It’s true that many Harley riders have had years of problem-free performance with ATF. We contend that a thicker oil will provide superior metal-to-metal wear protection. Chains and sprockets will last longer using a fluid with an appropriate viscosity.
How to change the oil in a Harley Softail?
How to Change the Oil in the Primary Chaincase of a Harley Softail Step 1. Take your Softail for a brief, 10-minute ride. Shift through all five gears, six for newer Softail models, while… Step 2. Place an oil drain pan below the primary chaincase on the left side of the engine. Unscrew the …
How to change primary case oil on Harley Davidson?
Changing the primary case oil is essentially the same on all the Harley Davidson models except for the Sportsters. This video walks you through the proper steps of replacing the oil inside your primary case and also how to adjust the primary chain tension on the bikes that aren’t equipped with the automatic chain tensioner.
How often do you change the primary fluid on a Harley Davidson?
The primary fluid must be changed every 5,000 miles to ensure that your Harley-Davidson is ready to ride when you are. Take your Softail for a brief, 10-minute ride. Shift through all five gears, six for newer Softail models, while riding at a moderate pace. Park the motorcycle on its side stand, once you return, and let it cool for 10 minutes.
Why is syn-3 not used in a Harley 6 speed?
Harley 6-speeds have had a rash of trans main bearings prematurely going out, related to the use of Syn-3 in the trans, which is too light for the application. Hence the bulliten to stop using it in the trans and to use it in the primary and engine only. I believe American Iron Magazine did an article on it as well. 2.)
How to Change the Oil in the Primary Chaincase of a Harley Softail Step 1. Take your Softail for a brief, 10-minute ride. Shift through all five gears, six for newer Softail models, while… Step 2. Place an oil drain pan below the primary chaincase on the left side of the engine. Unscrew the
How to change the oil in a Harley Davidson primary chaincase?
Remove the drain bolt O-ring and wipe the bolt threads and tip with a shop rag. Slip a new O-ring onto the bolt, then coat the O-ring with Harley-Davidson Formula+ Primary Chaincase Fluid. Screw the drain bolt into the primary chaincase by hand.
How does a primary transmission work on a Harley Davidson?
Harley-Davidson motorcycles use a chain-driven primary system to transmit power from the engine sprocket to the clutch housing. Drive plates in the clutch pack engage the plates in the clutch pack to drive the primary shaft in the transmission.
The primary fluid must be changed every 5,000 miles to ensure that your Harley-Davidson is ready to ride when you are. Take your Softail for a brief, 10-minute ride. Shift through all five gears, six for newer Softail models, while riding at a moderate pace. Park the motorcycle on its side stand, once you return, and let it cool for 10 minutes.