What should a GSXR 750 idle at?
Your bike should idle around 1300 RPM.
How do you change the shift light on a 2004 GSXR 600?
with the key off, press and hold down the button next to the shift light. then turn the key on and keep holding the button down. everything will light up like normal then the rpm neddle will stop where its set at, you can now let go of the button.
When should I shift my GSXR 600?
I usually shift around 5,000 rpm or so on my 750, and maybe slightly higher on a 600. If you want the best mileage, shift at the lowest RPM you can without lugging the engine. If you want to accelerate fast, shift at a higher RPM.
What’s the RPM of a Suzuki GSXR 750?
I have a 2002 GSXR-750 and it seems to idle high it idles at or around 1500rpm and since it is FI I can’t really adjust it at least I don’t think. I have only had one other bike that was FI and it was a 98 TLR and since there was nothing stock about it the idle was off a little on it.
What should the idle speed be on a Suzuki GSXR?
Your bike should idle around 1300 RPM. Hope this helps you some. An easy fix is to remove the airbox and theres and idle screw at the end of the throttle cable to the throttle body. Just loosen it.
How does Suzuki idle speed control system work?
Suzuki Idle Speed Control (ISC) system improves cold starting and stabilizes engine idle speed in a variety of conditions. An ultra-lightweight frame is built entirely of aluminum alloy castings and is engineered to deliver optimium rigidity, unmatched accuracy and maximum cornering performance.
What kind of noise does a Suzuki GSX-R make?
Induction noise sings in unison as the rpm’s climb but doesn’t sound quite as raspy as the 600.” – motorcycle-usa “Overall the GSX-R’s suspension is on the soft side, even on maximum settings, which can be limiting for really hardcore track riding.
What makes a Suzuki GSX R750 so good?
Crankshaft features forged steel construction and a secondary balancer shaft for reduced vibration at high rpm. Suzuki Idle Speed Control (ISC) system improves cold starting and stabilizes engine idle speed in a variety of conditions.
How do you adjust the rear shock on a GSX-R?
Adjust the rear compression damping by rotating the screw that is at the top of the rear shock. Rotate the screw counterclockwise and count how many clicks you hear. Then, rotate it back in for half of that amount of clicks. If you hear eight clicks, rotate it back in for four clicks.
Suzuki Idle Speed Control (ISC) system improves cold starting and stabilizes engine idle speed in a variety of conditions. An ultra-lightweight frame is built entirely of aluminum alloy castings and is engineered to deliver optimium rigidity, unmatched accuracy and maximum cornering performance.
Where is the rear rebounder on a GSX-R?
Adjust the rear rebounder, which is located at the bottom of the rear shock. Set the rebound so that when you push down on your bike, it does not rebound higher than its normal resting height. Adjust the rear compression damping by rotating the screw that is at the top of the rear shock.