How do you replace a front motor mount on a Harley?
It looks like it’s pooched out to one side. I watched a video on Fix my Hog where Bob LaRosa replaced the front mount on a 2005 Road King. All he did was loosen one bolt on the stabilizer link where it mounts to the frame, loosen the motor mount bolts and jack up the engine and took the old mount out.
What’s the serial number on the touring model motor mount?
The new mounts were beefed up to reduce deterioration from oil contamination, which sometimes occurs during oil changes. If you prefer the softer feel of the early mounts, you can purchase a BUELL motor mount, part number L0501.2, which is the same part as the early touring model mounts ending in “C”.
What kind of motor mount does a Harley Davidson use?
FM-4500 Dyna Front Motor Mount 1991-2017 FLD, FXD, FXDB, FXDC, FXDF, FXDFSE, FXDL, FXDS-CON, FXDWG, FXDX $180.00 Front Motor Mount 1996-2002 Buell $100.00 Rear Motor Mounts RM-09 Rear Motor Mounts – Upgrade 2009 – Present FLHR, FLHT, FLHX, FLTR $220.00 RM-4500 Dyna Rear Motor Mount 1991-2017
How do you install a new motor mount?
Spray a bit of Windex on the rubber portion of the new motor mount. This makes it even easier to put the new motor mount in place. Tighten the two nuts that attach the motor mount bracket to the engine (H). Torque 33 to 38 ft-lbs (see Figure 4).
What’s the front motor mount on a Harley Davidson?
The rubber front motor mount is an important but neglected part that lives in the worst possible environment. Between oil spilled when changing the oil filter, and dirt and grime kicked up by the front wheel, it’s a wonder they last as long as they do. When the time comes to change it, it is not a difficult job.
The new mounts were beefed up to reduce deterioration from oil contamination, which sometimes occurs during oil changes. If you prefer the softer feel of the early mounts, you can purchase a BUELL motor mount, part number L0501.2, which is the same part as the early touring model mounts ending in “C”.
Spray a bit of Windex on the rubber portion of the new motor mount. This makes it even easier to put the new motor mount in place. Tighten the two nuts that attach the motor mount bracket to the engine (H). Torque 33 to 38 ft-lbs (see Figure 4).
What kind of front motor mount do I Need?
The one from H-D is a newer improved style mount. Also that mount bracket attached to the engine case should always get loosened when changing the mount. Whew!
It looks like it’s pooched out to one side. I watched a video on Fix my Hog where Bob LaRosa replaced the front mount on a 2005 Road King. All he did was loosen one bolt on the stabilizer link where it mounts to the frame, loosen the motor mount bolts and jack up the engine and took the old mount out.
How much does a fm-1008 front motor mount cost?
Front Motor Mounts FM-1008 Front Motor Mount 1980-2008 FLHR, FLHT, FLHX, FLTR, FXR $100.00 FM-1011 Front Motor Mount 2009 – 2017 FLHR, FLHT, FLHX, FLTR $180.00 FM-1018 Front Motor Mounts
The one from H-D is a newer improved style mount. Also that mount bracket attached to the engine case should always get loosened when changing the mount. Whew!
Front Motor Mounts FM-1008 Front Motor Mount 1980-2008 FLHR, FLHT, FLHX, FLTR, FXR $100.00 FM-1011 Front Motor Mount 2009 – 2017 FLHR, FLHT, FLHX, FLTR $180.00 FM-1018 Front Motor Mounts
Can you use Glide pro on front motor mount?
If you install the Glide Pro front mount and the vibration isn’t eliminated or at least diminished, something else is going on. I replaced the worn out oem on my ’06 flhtc with a Glide pro, it did not totally eliminate the vibration but, it did make for a better ride.
How to remove and replace a Harley Motor mount?
Harley Motor Mount Removal and Replacement Video | Fix My Hog This video shows how to remove and replace the Harley motor mount. Our expert takes the time to remove the oil filter in this Fix My Hog video.
If you install the Glide Pro front mount and the vibration isn’t eliminated or at least diminished, something else is going on. I replaced the worn out oem on my ’06 flhtc with a Glide pro, it did not totally eliminate the vibration but, it did make for a better ride.
FM-4500 Dyna Front Motor Mount 1991-2017 FLD, FXD, FXDB, FXDC, FXDF, FXDFSE, FXDL, FXDS-CON, FXDWG, FXDX $180.00 Front Motor Mount 1996-2002 Buell $100.00 Rear Motor Mounts RM-09 Rear Motor Mounts – Upgrade 2009 – Present FLHR, FLHT, FLHX, FLTR $220.00 RM-4500 Dyna Rear Motor Mount 1991-2017
Is there a way to check the front motor mount?
The manual does not give any measurement for this, it only states to be sure the mounts support the weight of the engine, that said the Dyna is notorious for weak factory front and rear mounts The front mount gets destroyed if not using good oil filter changing practices
Why does my front motor mount not move?
Like the title says.I was riding along and noticed a vibration after I hammered down on it.Felt almost like a flat spotted tire.But when I stopped the bike didnt idle a smooth as it should.Motor seemed to be moving more than normal.But it could just be me. The front mount does look to be moving a bit.This is my first rubber mounted Harley.
The manual does not give any measurement for this, it only states to be sure the mounts support the weight of the engine, that said the Dyna is notorious for weak factory front and rear mounts The front mount gets destroyed if not using good oil filter changing practices
Like the title says.I was riding along and noticed a vibration after I hammered down on it.Felt almost like a flat spotted tire.But when I stopped the bike didnt idle a smooth as it should.Motor seemed to be moving more than normal.But it could just be me. The front mount does look to be moving a bit.This is my first rubber mounted Harley.