How much oil does a 2004 Harley-Davidson Sportster hold?
Although capacity of the engine is 3.5 quarts, you only use 3 quarts when replacing oil.
How do you do an oil change on a Harley Davidson?
You may want to use a torque wrench to tighten the plugs 14 to 21 feet (4.3 to 6.4 m)-lb; otherwise, tighten until the plugs are fully seated and not stripped. Remove the oil filter. Place your drain pan under the front end of the engine.
How to change the oil on a 2004 Heritage Softail?
Start the Heritage engine and allow the oil to warm for five minutes. Turn the engine off. Place the catch pan under the drain nut on the bottom of the engine. Remove the drain nut from the bottom of the Harley’s engine using the ratchet set. Allow the oil to drain from the Harley’s crank case and then replace the nut.
What kind of oil do you use on a Harley Davidson Sportster?
Start your Sportster up and let it run for long enough that your oil will heat up a bit. You want your oil warm when doing oil changes because warm oil flows out better and faster. Harley recommends using 20W-50 oil in your Sportster, which is a particularly thick oil, so warming it up first is definitely recommended.
Where is the oil filter on a Harley Davidson?
To get the hose off, loosen the clamp at the end of the hose with a flat head screw driver, then pull it off and let the oil drain into a drain pan. The oil filter on a Harley-Davidson Sportster is between the front cylinder and the frame and is pretty easy to access.
How to change oil in a Harley Davidson Sportster?
This oil change was performed on a 2012 Harley-Davidson Sportster, and would be similar on other rubber mount Sportsters from 2004 and up. Purchase your motor oil online at http://www.jpcycles.com/motorcycle-oi… and all of the tools you’ll need for the job at http://www.jpcycles.com/motorcycle-wo….
How often should I change the oil on my Harley Davidson?
Oil changes are the easiest and most cost effective way to prolong the life of your motorcycle and should be performed every six months or 3000 miles. Learning to change your oil could save a $100 to $150 dollars a year and when you’ve completed the task at hand you feel like you’ve accomplished something.
To get the hose off, loosen the clamp at the end of the hose with a flat head screw driver, then pull it off and let the oil drain into a drain pan. The oil filter on a Harley-Davidson Sportster is between the front cylinder and the frame and is pretty easy to access.
Start the Heritage engine and allow the oil to warm for five minutes. Turn the engine off. Place the catch pan under the drain nut on the bottom of the engine. Remove the drain nut from the bottom of the Harley’s engine using the ratchet set. Allow the oil to drain from the Harley’s crank case and then replace the nut.