How to remove rear wheel on Honda VTX 1800c?
This is a basic walk-through for removing/installing the rear wheel on the VTX 1800C. The process is identical for the 1300 model with the exception that the axle bolt is 8mm instead of 12mm.
How to torque a Honda VTX 1300 front wheel?
Now reinstall the axle bolt on the right side and torque it to 43 ft/lbs. If for any reason the axle slips in the left pinch bolts, hold it with a 17mm allen socket. With the axle bolt torqued in place, tighten the right side pinch bolts to 16 ft/lbs. That’s it – you’re done – congratulations!
How do you replace a rear tire on a Harley Davidson?
Start saving your money now by not having to rely on a motorcycle shop to remove the rear wheel from your Harley Davidson motorcycle. Next time you need to replace the rear tire on your Harley-do it yourself. Then you can simply take the rear wheel with tire to any motorcycle shop with a tire machine and have them put the new tire on.
When to replace rear wheel bearings on Honda VTX?
If you’re changing your own tires, all you need to do is stick your finger in that hole (see pic above) and turn the bearing. If you feel anything other than perfectly smooth rotation you should have the bearings replaced. It is important to always re-check these bearings after replacement.
This is a basic walk-through for removing/installing the rear wheel on the VTX 1800C. The process is identical for the 1300 model with the exception that the axle bolt is 8mm instead of 12mm.
If you’re changing your own tires, all you need to do is stick your finger in that hole (see pic above) and turn the bearing. If you feel anything other than perfectly smooth rotation you should have the bearings replaced. It is important to always re-check these bearings after replacement.
Do you need to remove license plate on Honda VTX?
Some people claim that it’s necessary to remove the license plate on a C model to get the tire out from under the fender, but guys with Retro fenders can tell you that it’s not necessary.
Do you need to remove exhaust bracket on Honda VTX?
The process is identical for the 1300 model with the exception that the axle bolt is 8mm instead of 12mm. Some say that you need to remove the exhaust and the license plate bracket to do this, but with a little patience and care I’ve never had a problem getting this done with them on.
The process is identical for the 1300 model with the exception that the axle bolt is 8mm instead of 12mm. Some say that you need to remove the exhaust and the license plate bracket to do this, but with a little patience and care I’ve never had a problem getting this done with them on.
Some people claim that it’s necessary to remove the license plate on a C model to get the tire out from under the fender, but guys with Retro fenders can tell you that it’s not necessary.