How do you remove a valve cover gasket?
Use the E 10 Torx bit from your bit set to remove the bolts from the valve cover. Here are all the bolts that you will need to remove. Hint: In case you can’t get a E 10 torx you may be able to get away using a 8 mm socket on those bolts. Remove the old valve cover gasket and clean the area where the gasket sits.
When to replace valve cover gasket on Mercedes Benz?
Step by step instructions on how to replace the valve cover gasket on Mercedes Benz V6 and V8 engines found on the E Class, C Class, ML Class and many other models. When the valve cover gasket starts to leak oil it will drip on top of the exhaust manifold.
How do you fix a gasket leak on a Mercedes?
Lift the cover up on one side about a couple of inches so it gets loose. Then lift the other side just a little bit. Now grab the cover on both sides and lift it up. It is not bolted down, it is held in place with a few clips. Locate the passenger valve cover. Towards the back of the valve cover gasket you will notice a black plastic tube.
What happens when the valve cover leaks oil?
When the valve cover gasket starts to leak oil it will drip on top of the exhaust manifold. Once the engine warms up, and the exhausts get hot, it will start to burn the oil and the burned oil smell gets inside the driver cabin. Picture shows where the oil was dripping on top of the exhaust manifold.
How do you replace a gasket on a 350?
Apply a single bead of gasket sealant around the lip of the valve cover, then position the replacement gasket onto the sealant. Position the gasket on the valve cover so that each of the gasket’s four bolt holes aligns with the bolt holes on the edges of the valve cover.
Use the E 10 Torx bit from your bit set to remove the bolts from the valve cover. Here are all the bolts that you will need to remove. Hint: In case you can’t get a E 10 torx you may be able to get away using a 8 mm socket on those bolts. Remove the old valve cover gasket and clean the area where the gasket sits.
How do you replace the valve cover on a 350?
Remove the two bolts that secure the top of the valve cover to the cylinder head with a wrench, followed by the two bolts at the bottom of the valve cover. Insert the blade of a flathead screwdriver between one side of the valve cover and the cylinder head, then twist the blade to unseal the valve cover from the cylinder head.
Step by step instructions on how to replace the valve cover gasket on Mercedes Benz V6 and V8 engines found on the E Class, C Class, ML Class and many other models. When the valve cover gasket starts to leak oil it will drip on top of the exhaust manifold.