How often should you adjust valves on Kawasaki Ninja?
the valve shims as a general rule of thumb don’t need to be adjusted till you have about 20,000 -> 30,000 kilometers on the clock. the fact you had to get it adjusted at 7,000 & 15,000 and shims were changed is a bit of a concern.
How much does valve adjustment cost motorcycle?
So how much does a valve adjustment or check cost? Generally speaking the average valve adjustment cost is around $300. However, valve adjustment cost depends on the type of bike that you ride, the amount of valves that your engine has, and whether those valves are operated by overhead cams or pushrods.
How do you change the valve on a Ninja 250?
The screw and locknut valve adjustment can be accomplished without further engine disassembly. On the 2007 and older Ninja 250 models, loosen the nut with a 9 mm wrench and turn the adjuster with a flat blade screwdriver to set the gap to middle point of the specified clearance range.
What’s the difference between a Ninja 250 and 300?
The 250 was updated in 2008, and the modernized Ninja 300 arrived in 2013. These bikes are reliable and easy to service, but there are some differences over the years. One of the big changes to the little Ninja is the valve train. The 2008 and newer models use a shim under bucket arrangement for valve clearance adjustment.
What’s the change in the Ninja valve train?
One of the big changes to the little Ninja is the valve train. The 2008 and newer models use a shim under bucket arrangement for valve clearance adjustment. The older models use screw and locknut. Like most instances of screw and locknut vs. shim adjustment, the service intervals are shorter for the screw and locknut types.
How often do you need valve clearance on a ninja?
Like most instances of screw and locknut vs. shim adjustment, the service intervals are shorter for the screw and locknut types. The older bikes call for a valve clearance inspection every 6,000 miles, but the newer bikes with shims get an additional 1,500 miles between checks.