How do I know what size jet carburetor I have?
Jets are threaded and have a small orifice through their center that varies based on the size of the jet. For example, a jet may be stamped (on its head) with the number 30. This indicates that the jet’s size is 30 mm.
What is the main jet of a basic carburetor?
The main jet provides the fuel at 80 percent to wide-open throttle. The fuel flows up and out through the needle jet into the throat of the carburetor. When changes in air density are significant the main jet will need to be swapped. Handling the mixture between the pilot and main is the needle jet and needle.
How big is a Sportster carburetor jet engine?
Sportster Carburetor Jet Sizes. KEIHIN CARBURETOR MAIN JET SIZES 1988 TO 2006. Year 1988 Engine 883 – Jet Size 170 (California 165) Year 1988 Engine 1200 – Jet Size 200 (California 180)
When do you change the jet sizing on a carburetor?
The jets on a carburetor meter the amount of fuel that enters the throttle bores of the carburetor where it mixes with incoming air. If the engine shows performance problems such as stalling or sluggish acceleration, you’ll need to change the jet sizing. Jets are threaded and have a small orifice through their …
What’s the correct CF for a 12mm carburetor?
Take 0.948 (Denver atmospheric pressure at 70 degrees) x jet size (60) = new jet size (56.88) round up 57 would be the proper jet size to start at for a stock scooter using a 12mm carburetor. the CF is correction factor. CF=1 for sea level, 70 degrees F. If it is 80 F at 5000 ft, you calculate a new CF, say 0.9 (this is just an example).
How does carburetor jetting work on a Harley?
Install the carburetor back onto the bike and perform the tuning procedure as described under Carburetor Tuning. As you can see, Harley carburetor jetting is a fairly simple procedure that under most conditions will yield greater performance when requiring a richer fuel mixture.
Sportster Carburetor Jet Sizes. KEIHIN CARBURETOR MAIN JET SIZES 1988 TO 2006. Year 1988 Engine 883 – Jet Size 170 (California 165) Year 1988 Engine 1200 – Jet Size 200 (California 180)
The jets on a carburetor meter the amount of fuel that enters the throttle bores of the carburetor where it mixes with incoming air. If the engine shows performance problems such as stalling or sluggish acceleration, you’ll need to change the jet sizing. Jets are threaded and have a small orifice through their
Take 0.948 (Denver atmospheric pressure at 70 degrees) x jet size (60) = new jet size (56.88) round up 57 would be the proper jet size to start at for a stock scooter using a 12mm carburetor. the CF is correction factor. CF=1 for sea level, 70 degrees F. If it is 80 F at 5000 ft, you calculate a new CF, say 0.9 (this is just an example).
Install the carburetor back onto the bike and perform the tuning procedure as described under Carburetor Tuning. As you can see, Harley carburetor jetting is a fairly simple procedure that under most conditions will yield greater performance when requiring a richer fuel mixture.