What size is a Harley drain plug?

What size is a Harley drain plug?

M18x1. 5×12 Magnetic Drain Plug for Harley Davidson Harley Davidson’s Porsche-designed V Rod engines require only one drain plug – for the engine oil, transmission oil, and for the primary chain case. This drain plug works for all three and is equipped with a 1/2″ diameter high-temperature magnet.

Where is the drain plug on a Harley Davidson Dyna?

Dyna and Touring models have their oil drain plugs under the transmission housing. Drain the engine oil into an oil pan. Replace the drain plug’s O-ring, then screw it into place after the oil has drained. Tighten the drain plug to 18 foot-pounds with a torque wrench.

Where is the oil drain plug on a softail motorcycle?

Unscrew the engine oil drain plug with a 5/8-inch socket and a socket wrench. On Softail models the engine oil drain plug is under the right side of the motorcycle’s frame, near the rear wheel. Dyna and Touring models have their oil drain plugs under the transmission housing. Drain the engine oil into an oil pan.

Can a dirty drain plug damage a Harley?

If a drain plug is not installed straight or is installed dirty, the plug’s threaded allocation in the case can become permanently damaged. The most common way oil cases become damaged is from Harley drain plug over tightening.

Where is the oil drain plug on a road King?

The tank on your Road King is on the bottom of the transmission. Look underneath the transmission and you’ll see two drain plugs. The plug on left front of the oil pan is the engine oil drain. The plug near the center of the pan is the transmission drain plug. You can’t post conmments that contain an email address.

Dyna and Touring models have their oil drain plugs under the transmission housing. Drain the engine oil into an oil pan. Replace the drain plug’s O-ring, then screw it into place after the oil has drained. Tighten the drain plug to 18 foot-pounds with a torque wrench.

If a drain plug is not installed straight or is installed dirty, the plug’s threaded allocation in the case can become permanently damaged. The most common way oil cases become damaged is from Harley drain plug over tightening.

Unscrew the engine oil drain plug with a 5/8-inch socket and a socket wrench. On Softail models the engine oil drain plug is under the right side of the motorcycle’s frame, near the rear wheel. Dyna and Touring models have their oil drain plugs under the transmission housing. Drain the engine oil into an oil pan.

Is there a leak from the primary drain plug?

Advice needed have slight primary plug oil drip when oil hot,plug screwed in level with cover on 97 dynaglide. tried PTFE tape but doesn’t last.this plug is tapered and doesn’t use an o ring. Thanx guys. I know the lug on my 96 dyna screws in quite a way. I have no leak issues. Are you sure it’s not a leak from the derby cover?