How do you replace clutch cable on a Harley Davidson Sportster?
Removing the clutch cable from the ramp and coupling. Install the new cable to the lever first. Install the new cable onto the ramp and coupling mechanism and slide the mechanism over the adjustment screw. Make sure the slot in the primary cover lines up with the tab on the mechanism.
What kind of clutch does a Sportster have?
Just bought her a 2009 XL 1200L and the clutch is really stiff when you pull in the lever and when you let the lever out it is jerky and the clutch is either disengaged or engaged there really is no middle ground. This is making it really hard for her to take off from a stop since she can’t slip the clutch.
How to replace transmission fluid on a Harley Davidson Sportster?
Refer to the article: Harley Davidson Sportster: How to Replace Transmission Fluid for instructions on re-filling the system. Remove the six T27 Torx screws from the clutch inspection cover. Figure 1. The clutch inspection cover. Remove any clutch cable holders from the bike’s frame. These may clip onto the frame or bolt on.
How does the clutch work on a Harley Davidson?
The pressure plate squeezes and releases the tension on the disks in relation to the clutch levers position. Once the clutch lever is squeezed, the pressure plate releases. This stops the clutch disks from generating friction and keeps the engines torque from traveling through the transmission.
Where is the clutch cable on a Harley Davidson Sportster?
Harley Davidson Sportster: How to Replace Clutch Cable. The clutch cable connects the lever to the clutch disengagement assembly inside the transmission. The cable is made of braided wire for strength and flexibility. The cable must maintain a precise length between the lever and transmission, otherwise difficult shifting will result.
How long does it take to adjust clutch on Harley Davidson Sportster?
Checking and adjusting a Harley Davidson Sportster Clutch, Its is a 20 minute job that can be carried out using 1/2 and 9/16 wrench. 27 tore bit for the cover.This will work on all Sportster, any body can do it. Loading…
Is the clutch lever hard to pull on a Harley Davidson?
If you own a Harley Davidson, you know the reputation for clutch levers being very difficult to pull in when you shift. I always thought this was just the nature of the beast, but I WAS WRONG!
Refer to the article: Harley Davidson Sportster: How to Replace Transmission Fluid for instructions on re-filling the system. Remove the six T27 Torx screws from the clutch inspection cover. Figure 1. The clutch inspection cover. Remove any clutch cable holders from the bike’s frame. These may clip onto the frame or bolt on.