How often should you change the drive belt on a Harley Davidson?
every 5,000 miles
The maintenance schedule for all Harley motorcycle models calls for a drive belt inspection and tension check after the first 1,000 miles and every 5,000 miles thereafter, the same interval as an oil-and-filter change.
How tight should the drive belt be on a Harley Davidson?
With a high horsepower engine, it is better to have the belt a little tight rather than loose. A loose belt will break much more readily than a tight one. Most people do not tighten the belt to its proper tension. If you plan on “racing” or hot rodding your bike, invest in a Harley-Davidson BELT TENSION GAUGE (Part No.
How often should you change your motorcycle belt?
But even veteran enthusiasts can make the mistake of forgetting to look after their bike’s drive belt, which is strong, stretch-resistant and made from tensile cords. Because a drive belt can last up to 100,000 miles before needing replacement, riders may lose track of this important part of motorcycle maintenance.
How do you measure a Harley Davidson drive belt?
Harley Davidson uses 1 ½”, 1 1/8”, 1” 20mm and 24 mm wide belts….How to determine your belt lenght
- 61 Tooth Rear.
- 65 Tooth Rear.
- 70 Tooth Rear.
- 3 step formula:
- ( C * 2 ) / 13.8.
- ( A + B ) / 2.
- Step 1 + Step 2 = number of tooth required on belt.
When to replace a Softail belt on a Harley Davidson?
Watch part 1 of 3 of a Harley softail belt replacement provided by Fix My Hog. When it comes to Harley-Davidson maintenance the rear drive belt is a big one. There are many factors other that a belt breaking that might make you change it misalignment or warpage due to incorrect installation of parts.
What happens to the drive belt on a Softail?
The drive belt on a Harley Softail is connected to the rear wheel and the transmission. If the drive belt is damaged or broken, the bike will not run properly.
How do you remove a transmission from a Softail?
Remove the rear axle nut using the pliers. Tap the axle rod out using the push rod and hammer. Push the Softail’s rear wheel forward and remove the drive belt from the sprocket. Remove the cover plate from the side of the transmission and pull the belt off the transmission. Place the new belt onto the transmission.
Why do I need to change my seat belt?
There are many factors other that a belt breaking that might make you change it misalignment or warpage due to incorrect installation of parts. If you plan on going a long distance and your belt is getting old our warn take the time to replace it.
Watch part 1 of 3 of a Harley softail belt replacement provided by Fix My Hog. When it comes to Harley-Davidson maintenance the rear drive belt is a big one. There are many factors other that a belt breaking that might make you change it misalignment or warpage due to incorrect installation of parts.
The drive belt on a Harley Softail is connected to the rear wheel and the transmission. If the drive belt is damaged or broken, the bike will not run properly.
Remove the rear axle nut using the pliers. Tap the axle rod out using the push rod and hammer. Push the Softail’s rear wheel forward and remove the drive belt from the sprocket. Remove the cover plate from the side of the transmission and pull the belt off the transmission. Place the new belt onto the transmission.
What kind of belt drive does a Dyna have?
We had a Dyna, Touring and Softail on hand to show you the slight differences. It doesn’t really matter the year and make of your Harley as this process is pretty standard. We can say that this video covers 2000 and newer Harley’s and likely earlier models.