Can you replace a drive belt?
It is often beneficial to change the drive belts in your car approximately every 60,000 to 100,000 miles. By undergoing annual car inspections, you can have your drive belts evaluated. If any signs of damage or severe wear and tear are identified, the belts can be replaced.
How do you change the drive belt on a Yamaha Grizzly?
Remove the footrest cover, the upper seat panel, and the center panel from your machine. Next, remove the 10mm bolts to the outer cover of the drive belt. Step 2. Remove the bearing carrier from the primary sheave for easier access to the drive belt. Step 3.
Is there a belt change tool for a Yamaha?
I have made a Belt Change Tool for Yamahas that will hold the secondary sheave open for you. This makes changing the belt much easier and quicker, espescially in the cold or when the belt has shredded and you need to clean the strands out.
How to replace the road star drive belt?
Be wary of letting the wheel lean to the left as the pulley isn’t bolted in place and will fall off. Also make sure you don’t lose the wheel spacers when you set the wheel aside. After removing the wheel stick your head up under the fender and remove the plastic splash plate/mud guard (necessary for part of step 6).
How to replace starter belt on Yamaha golf cart?
These belts install similar on other Yamaha models and we should have videos on these in the coming months. It is important to make sure your starter belt is snug for proper operation of your motor. Please subscribe to our You Tube channel for other popular golf cart parts how to videos. Loading…
Where to buy 1988 Yamaha Phazer pz480m parts?
Navigate your 1988 Yamaha Phazer PZ480M schematics below to shop OEM parts by detailed schematic diagrams offered for every assembly on your machine. OEM is an acronym for original equipment manufacturer, which means that the 1988 Yamaha Phazer PZ480M OEM parts offered at BikeBandit.com are genuine Yamaha parts.
How do you change the belt on a Phazer?
Cripes time is moving along. Now go figure, the 2007 Phazer comes out with the old style secondary. Anyway, the way I did the older clutches was to put the parking brake on. With your left hand finger tips grab hold of the spline castings on the back side of the inside sheave and pull up (rotate the sheave).
What is the schematic diagram for a 1988 Yamaha Phazer?
Our detailed 1988 Yamaha Phazer PZ480M schematic diagrams make it easy to find the right OEM part the first time, whether you’re looking for individual parts or an entire assembly.
These belts install similar on other Yamaha models and we should have videos on these in the coming months. It is important to make sure your starter belt is snug for proper operation of your motor. Please subscribe to our You Tube channel for other popular golf cart parts how to videos. Loading…