What is the F1 code on a Suzuki GSXR?
It is is small white connector that does not plug into anything, and has a rubber cap on one end. Click to expand… This is weird, after riding my 2002 GSXR-1000 over 19,000 miles I get the F1 code C46.
Where is the dealer mode switch on a Suzuki GSXR?
Location of dealer mode switch and how to get the codes. The dealer mode connector is under the tail cowling on the left side of the bike, near the regulator/rectifier. It will have only two wires going to it.
Where to find diagnostic code on Suzuki Volusia?
I have the dealer switch for download. That’s all it is is a spst switch that plugs into the harness. It uses a toggle switch to do the same thing you are doing with a paper clip. The code is displayed in the odometer window. Click to expand…
What is the c00 code on a 2005 GSXR1000?
On 2005 GSXR1000 when I install the jumper I get the C00 code. How do I get rid of the F1 and light if nothing is wrong?Looked through everything listed and I did not see anything about it.
It is is small white connector that does not plug into anything, and has a rubber cap on one end. Click to expand… This is weird, after riding my 2002 GSXR-1000 over 19,000 miles I get the F1 code C46.
What are the warning lights on a Suzuki?
The following are warning lights and indicators found in vehicles built by Suzuki. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are over 50 of them so be patient!
Why does my Suzuki GSXR have a Fi warning?
Originally when the full exhaust Yosh RS-3 was installed all was done was the black/brown wire from the ECU input will prevent that “Fi” warning message from appearing in your instrument panel. That was the only wire cut, that’s it.
Location of dealer mode switch and how to get the codes. The dealer mode connector is under the tail cowling on the left side of the bike, near the regulator/rectifier. It will have only two wires going to it.
What happens when a diagnostic code is thrown on a Suzuki Volusia?
The fi lite will stay on until the code is downloaded (paper clip or factory switch). The fi lite will illuminate again if the anomaly that caused the code is not fixed, (it will just throw the same code again).
Why does my Suzuki Volusia have a fi light?
So I’m thinking if you get repeated fi lights, and all it ever shows you is C00, it is not caused by a fault code, something else is causing the fi lite to illuminute. The fi light is used for two purposes, one, as we’ve discussed, is to inform you of a fault code stored in the odometer display, there are about 30 codes.
Originally when the full exhaust Yosh RS-3 was installed all was done was the black/brown wire from the ECU input will prevent that “Fi” warning message from appearing in your instrument panel. That was the only wire cut, that’s it.