What kind of rotors does a ZX6R rear wheel need?
-03/04 ZX6R Rear Wheel is a direct bolt on, the front wheel needs the 05+ ZX6R rotors to be used. Always use the spacers for the generation wheel you are swapping for a direct swap.
Can a Kawasaki Ninja ZX6R be used as a front wheel?
-05+ ZX6R Rear Wheel can be used, but is skinnier and needs either new spacers made or spacers added to what is there, the front wheel is a direct swap, but the newer rotors are needed as well. -06+ ZX10R Front Wheel is the same situation as the newer ZX6R.
Are there any ZX6R sprockets that are the same?
-98-10 ZX6R Front Sprockets are the same CHECK PITCH 2003 went to 520! -05-08 ZX6R Swingarms are the same, in 07 they changed the look slightly, but still the same bolt spacing and sizing.
Is the ZX6R swingarm the same as the 98-02?
-03/04 ZX6R Swingarm is the same as the 98-02 in size, but it has an extra tab or two for more Hugger Choices. -05-08 ZX6R Swingarm bolts on, but the corresponding wheel needs to be used for it to be direct bolt on, also a longer chain and brake line is needed.
What kind of radiator does Kawasaki ZX6R use?
-03-06 ZX6R Radiator will bolt up and the hoses line up great, the 05/06 ZX6R does not have a fan switch built in, and they are physically smaller then the original, but work fine, especially for fairing swap when you need a smaller one. -03-06 ZX6R Pistons fit, the “RR” Pistons are forged and 1MM smaller then the “636” Pistons.
-03/04 ZX6R Rear Wheel is a direct bolt on, the front wheel needs the 05+ ZX6R rotors to be used. Always use the spacers for the generation wheel you are swapping for a direct swap.
What kind of clutch does Kawasaki Ninja ZX6R use?
-03-10 ZX6R Clutch Perch will bolt up and work fine, but you need the correct lever for it. -03-10 ZX6R or ZX10R Front Master Cylinder will work as well, but with the 05+ ZX6R you will need new brake lines because its a radial master, and works much better.
-98-10 ZX6R Front Sprockets are the same CHECK PITCH 2003 went to 520! -05-08 ZX6R Swingarms are the same, in 07 they changed the look slightly, but still the same bolt spacing and sizing.
Are there any forks that are the same as ZX6R?
-03-08 ZX6R Forks the same dimensions are the same, just 03/04 had smaller rotors so the caliper mounts were 10MM shorter. -03-10 ZX6R Calipers all bolt up, 03-06 ZX6R Exactly the same 07-10 ZX6R went to Nissins which are a much better caliper.
-05+ ZX6R Rear Wheel can be used, but is skinnier and needs either new spacers made or spacers added to what is there, the front wheel is a direct swap, but the newer rotors are needed as well. -06+ ZX10R Front Wheel is the same situation as the newer ZX6R.
Is the Kawasaki ZX6R J the same as the 05-08 zxr600?
So to put all this in simple terms, the 00-02 ZX6R “J” is IDENTICAL to the 05-08 ZZR600 with the exception of the fairing stay which can be used, so ANY PART FOR THE 05-08 ZZR600 WILL FIT THE 00-02 ZX6R “J” AND VICE VERSA! Now for a little more info regarding other bikes.
-03/04 ZX6R Swingarm is the same as the 98-02 in size, but it has an extra tab or two for more Hugger Choices. -05-08 ZX6R Swingarm bolts on, but the corresponding wheel needs to be used for it to be direct bolt on, also a longer chain and brake line is needed.
Can You mount a 10R on a ZX6R?
As long as the spec for the outbearing ID’s are the same between the two wheels and the physical dimensions are the same then in therory all you would ahve to do is order bearings with the proper outside adn inside dimensions so that the 10R’s axel will fit in them and allow them to mount up. Dumb idea here then…
-03-08 ZX6R Forks the same dimensions are the same, just 03/04 had smaller rotors so the caliper mounts were 10MM shorter. -03-10 ZX6R Calipers all bolt up, 03-06 ZX6R Exactly the same 07-10 ZX6R went to Nissins which are a much better caliper.