What kind of engine does a Toyota Tercel have?
Toyota followed similar lines with the 4E-FTE as they did with the 3E-TE. Thus the 4E-FTE is basically a 4E-FE with stronger connecting rods and lower compression pistons. It also has a harmonic damper instead of a normal crankshaft pulley.
What are the torque specifications for a Toyota 1.6l-97ci-s4?
24.4 4A-FE Exhaust Manifold Bolts Type: Bolt 47 564 63.72 4A-FE Driveplate Bolts (AUTOMATIC Transmission) Type: Bolt 58 696 78.64 4A-FE Flywheel Bolts (MANUAL Transmission) Type: Bolt 14 168 18.98 Type: Bolt 3.5 42 4.75 Type: Bolt 7 84 9.49 Type: 16 192 21.69 Type: Bolt 7 84 9.49 4A-FE Rear Crankshaft Oil Seal Retainer Bolts Type: Bolt 87 1044
What’s the difference between 1st gen and 2nd Gen Tercel engines?
First off the throttle body bore is slightly smaller (45mm vs 50mm on the 1st gen). The intake manifold is a quite a bit different. It incorperates smaller diameter and longer runners along with a smaller plenum.
What kind of cap nuts are in a Toyota 1.6l-97ci?
12.2 4A-FE Camshaft Bearing Cap Bolts Type: Bolt 36 432 48.81 4A-FE Connecting Rod Cap Nuts Type: 44 528 59.66 4A-FE Main Bearing Cap Bolts Type: Bolt 47 564 63.72 Type: Bolt 44 528 59.66 Type: Bolt
Toyota followed similar lines with the 4E-FTE as they did with the 3E-TE. Thus the 4E-FTE is basically a 4E-FE with stronger connecting rods and lower compression pistons. It also has a harmonic damper instead of a normal crankshaft pulley.
What are the torque specifications for a Toyota 1.8L 109ci-s4?
7A-FE Camshaft Bearing Cap Bolts Type: Bolt 22 264 29.83 7A-FE Connecting Rod Cap Nut NOTE: 22FtLbs + 90deg Type: 43 516 58.3 7A-FE Main Bearing Cap Bolts Type: Bolt 22 264 29.83 7A-FE NOTE: 3 Step: 22 FtLbs; 90deg; 90deg Type: Bolt 25 300 33.9 Type: Bolt 47 564 63.72 7A-FE Driveplate Bolts (AUTOMATIC Transmission) Type: Bolt 58 696 78.64
What kind of torque does a Toyota Celica have?
TORQUE SPECIFICATIONS TOYOTA APPLICATION FT-LBS (N-m) AXLE SPINDLE NUT CAMRY (1994-92) 217 (294) CELICA (1992) & SUPRA 203 (276) CELICA (1994-93) 166 (226) CRESSIDA (REAR 1993-92) 203 (276) CELICA ALL-TRAC (REAR 1993-92) 166 (226) PREVIA & TERCEL 166 (226) MR2 (1994-91) NON-TURBO 152 (206)
First off the throttle body bore is slightly smaller (45mm vs 50mm on the 1st gen). The intake manifold is a quite a bit different. It incorperates smaller diameter and longer runners along with a smaller plenum.
The EFI engine was also adopted for the Tercel in the late 1980’s. Two Toyota Tercel variants were offered in 1991; a four-door and a two-door sedan. North American buyers were treated with the Base Coupe, DX Coupe, DX Sedan, and LE Sedan models. A 1.5-liter 3E-E and a 1.5-liter 5E-FE 16-valve DOHC engines were introduced for the Toyota Tercel.
When did the Toyota Corolla Tercel come out?
When the Tercel was introduced in 1980, its official name was the Toyota Corolla Tercel. It was equipped with a 1.5-liter, 4-cylinder engine rated at 60 hp. The vehicle was then available only in two-door coupe and three-door hatchback body styles and transmission options include a 4-speed manual, 5-speed manual and 3-speed automatic units.
How to test the IAT sesnor Toyota 1.8L?
In this tutorial I’m gonna’ show you how to test the intake air temperature (IAT) sensor of your Toyota equipped with a 1.8L 4 cylinder engine. The intake air temperature (IAT) sensor is part of the mass airflow (MAF) sensor assembly and it can be easily tested with either a scan tool or a multimeter and I’ll show you how.
What happens when the IAT sensor goes bad on a Toyota?
When the intake air temperature (IAT) sensor on your Toyota goes bad, the check engine light (CEL) will immediately illuminate to let you know that there’s a problem and that a diagnostic trouble code has set to indicate a problem. Here are some of the specific symptoms you’ll see/have:
Is the Toyota Tercel OBDII emissions compliant?
It is also OBDII compliant. In 1997 there was a small redesign done to the 2nd gen 5E-FE. Toyota was able to pass emissions without the use of an EGR valve and instead used an advanced charcoal canister system. Along with this change they altered the fuel system to be a returnless type.
What’s the difference between Toyota Tercel and 5E-FE?
Oddly enough the cross sectional area of the two intake port shapes are nearly identical. The exhaust ports and bolt pattern remained the same. The 2nd gen 5E-FE is also more technically advanced than its older brother. It utilizes knock sensing and a distributorless ignition system. It is also OBDII compliant.
They were primarily available in 4WD configurations. All North American Tercels were fitted with a 1.5L four-cylinder engine producing a modest 63 hp and 4800 rpm.
Why is the sixth gear in a Toyota Tercel extra low?
Unusually, the sixth gear in the transmission is actually an “extra low” first gear, giving the transmission a 17.6:1 final drive ratio. This extra low gear was put in place to allow the engine to develop the torque needed to extract the vehicle from conditions that would normally require a low range transfer case.
What’s the final drive ratio of a Toyota Tercel?
The EL gear generates a 17.6:1 final drive ratio, giving the driver the torque needed to extract the vehicle from conditions which otherwise may have trapped it. It is only available when in four-wheel drive, and because of its low gear-ratio it is suitable only for very low-speed use.
When did the Toyota Tercel get a facelift?
In August 1980, the Tercel (and Corsa) underwent a facelift, with considerable changes to the front and minor ones to the interior and rear. The 1A engine was replaced by the 3A of identical displacement but now with 83 PS (61 kW).
It was built as front-engine, four-wheel or front-wheel drive. It was available with both diesel and petrol engines, and this model was manufactured with four-speed or five-speed manual and automatic transmission styles.
When did Toyota make the Toyota Tercel subcompact?
Every Manual available online – found by our community and shared for FREE. Enjoy! The Tercel is a subcompact manufactured by Toyota from 1978 to 1999 across five generations, in five body configurations sized between the Corolla and the Starlet.
What is the repair manual for a Toyota Celica?
Toyota Camry V20 Workshop Manual… Toyota Camry XV30 Workshop Manual… Toyota Celica ZZT230 ZZT231 Repair… Toyota Celica Service Manual 1970-1977… Toyota Celica Service Manual 1985-1989… Toyota Celica Workshop Manual 1989-1993 models:…
Where can I find a Toyota repair manual?
To narrow down your search please use the dropdown box above, or select from one of the available vehicles in the list below. Our Toyota Automotive repair manuals are split into five broad categories; Toyota Workshop Manuals, Toyota Owners Manuals, Toyota Wiring Diagrams, Toyota Sales Brochures and general Miscellaneous Toyota downloads.
What kind of transmission does a Toyota Celica use?
Quality parts guaranteed! OE Replacements. Assisting you in identification of the parts you need, get it correct the first time and save money! Toyota manual transmission use in Camry, Celica, Corolla, Supra, MR2, Tercel, Land Cruiser and Toyota Pick up Trucks are covered in this section.
Whether a Toyota has an interference engine or not depends on which engine Toyota put in the vehicle. The 1980 through 1988 Tercel and the Corolla both use the 1.5-liter engine with the engine codes 3A and 3A-C. In 1987 and 1988, some of the 1.5-liter Tercels have an engine designator code of 3E or 3E-E, which is also an interference engine.
What is the engine designator code for a Tercel?
In 1987 and 1988, some of the 1.5-liter Tercels have an engine designator code of 3E or 3E-E, which is also an interference engine. This engine is found in the Tercel up to 1994.
Is there an interference engine in a Toyota?
While many of Toyota’s models are freewheeling, several feature interference engines. Whether a Toyota has an interference engine or not depends on which engine Toyota put in the vehicle.
When did Toyota stop making the Tercel wagon?
The Tercel wagon (and four-door sedan in Japan) continued with the same design until February 1988 (when the Sprinter Carib was replaced by a larger, Corolla-based design), while the sedans and hatchbacks moved on to the newer design. Versions available in Europe:
Is the Corolla E80 similar to the Toyota Tercel?
For example, the Toyota Corolla E80’s frame is similar to the AL20 Tercel’s frame. Also, Toyota designed a new A engine for the Tercel, attempting simultaneously to achieve good fuel economy and performance and low emissions.
Is there a 4 and 5 speed FWD overhaul kit?
Toyota 4, 5 & 6 Speed (FWD) Manual Transmission Rebuild Kits and Parts Toyota 4, 5 & 6 Speed (FWD) Manual Transmission Parts, these quality manual transmission part, rebuild kits and overhaul kits are designed to be top of the line overhaul kits for your GM Geo Prizm and Toyota models Camry, Celica, Corolla, MR2, Paseo and Tercel.