How do you remove the front sprocket on a bicycle?
Grasp the crank arm and pull in the direction away from the bicycle frame to remove the crank arm. Set the crank arm aside. Grasp the front sprocket and pull in the direction away from the bicycle frame to remove the sprocket.
How can you tell if a sprocket is worn?
Look closely at the sprocket teeth to see if they have become sharp at the tips and/or slightly curled. The teeth on a new sprocket are straight and have a flat or domed shape at the tip. If the teeth are sharp, the sprocket is worn.
How do I change the front gear on my bike?
A long push (with two clicks) will move the chain into a larger, easier gear in the rear (right hand) and a larger, harder gear in the front (left hand). A short push (with one click) will move the chain into a smaller, harder gear in the rear (right hand) and a smaller, easier gear in the front (left hand).
Where to buy HONDA VTR 1000 F1 Firestorm parts?
Shop for Honda VTR 1000 F1 Firestorm – SC36 01 spare parts and accessories. Take advantage of our easy ordering system, with replacement parts tailored to your specific machine and sorted by category.
How does a VTR1000F Firestorm suspension fork work?
When you put the oil in the fork you have to pump the fork tube up and down a few times, do this slowly or you WILL get a glob of oil in the face (don’t ask how I know this). The air gap is made without the spring or spacer in the fork.
When to set up valve timing on Firestorm?
Will let you all know when the Firestorm is better again. When you’re ready to set up the valve timing, line up the front (inlet) cam sprocket first, make sure you keep the cam chain taut from the crank sprocket when you do that. Then line up the rear (exhaust) cam sprocket next Chris. A closed mouth gathers no foot.
How to remove CCT’s on Firestorm VTR1000?
Tape the key in place once you’ve locked the tensioner off, as you don’t want the key jumping out. Next undo and remove the CCT.