Why is the Check Engine light on on my sportsman 800?
Its a 2007 Sportsman 800 by the way. Any ideas as to why it came on? How can I get it to shut off? Will I hurt anything if I run it with the check engine light on? The quad still runs great even with the light on. Nevermind! I disconnected the battery for about 20 minutes, reconnected everything, fired it up and bye bye check engine icon.
How to check engine light on Polaris quad?
Quad in neutral, turn the key on and off 3 times quick, let it stay in the on position on the 3rd time and it should flash the engine light to give you the code. 5 flashes =5, ect. all codes are 2 digit numbers.
How often do you change the service light on a Polaris?
Polaris suggests changing the oil every 1,000 miles or 100 hours of driving, whichever comes first. If you are due for an oil change, the service light will come on. After you’ve changed the oil, reset the light to start the next service interval. Turn the key to the “Off” position and remove it from the ignition.
How often should I change the oil in my Polaris ATV?
Polaris makes a line of ATVs that, like most vehicles, require regular oil changes. Polaris suggests changing the oil every 1,000 miles or 100 hours of driving, whichever comes first. If you are due for an oil change, the service light will come on. After you’ve changed the oil, reset the light to start the next service interval.
What’s the engine warning light on a Polaris 800?
Hello, I was reading your posts and thought I’d ask a question about the engine warning light. I am new to UTVs, just bought my first a used 2012 Polaris 800 XP. The engine light came on after driving it about 20 min. There doesn’t seem to be any performance issues. I followed the advise (above) and my code is 0 51 and the fault code is 3.
Its a 2007 Sportsman 800 by the way. Any ideas as to why it came on? How can I get it to shut off? Will I hurt anything if I run it with the check engine light on? The quad still runs great even with the light on. Nevermind! I disconnected the battery for about 20 minutes, reconnected everything, fired it up and bye bye check engine icon.
How to reset the service light on a Polaris ATV?
How to Reset a Polaris Service Light. Shift the ATV gear into neutral with the shift stick. This gear is often labeled with an “N”. 2 Press the button labeled “Mode Overide”. This button is next to the “Engine Stop” switch on the left-hand handle bar. Hold down the “Mode Override” button while turning on the vehicle.
How can I Make my Polaris service light blink?
Select the “Service Interval” choice from the menu on the control panel. Press the “Mode Override” button until you see this option. Press the “Manual Override” button three times. This will cause the light to blink.