Why does my brake controller not work when I press the brake?
It connects to the wire on this switch that carries a signal ONLY when the brake pedal is pressed. It should not have a signal at any other time. Use a circuit tester, like # 40376, to test the wires. If your brake controller red wire is not connected to the correct wire, or is loose or broken, this would cause the problem you are experiencing.
What happens when the brake light switch is not working?
Brake light switch is installed above the brake pedal. Many vehicle systems including Push-Button start, Antilock Brakes and Vehicle Stability Control cannot operate if a brake light switch is not working properly. The brake light switch serves two major functions. First, it turns on the brake lights when a driver presses the brake pedal.
Where does the red wire for the brake controller go?
The red wire needs to attach to the stop light switch above the brake pedal. It connects to the wire on this switch that carries a signal ONLY when the brake pedal is pressed.
How to adjust the brake light switch on a car?
1 Adjust Brake Light Switch (if there is room.) 2 Brake Light Fuse 3 Brake Light Stopper / Bumper Pad 4 Brake Light Wire Harness More …
Brake light switch is installed above the brake pedal. Many vehicle systems including Push-Button start, Antilock Brakes and Vehicle Stability Control cannot operate if a brake light switch is not working properly. The brake light switch serves two major functions. First, it turns on the brake lights when a driver presses the brake pedal.
When do you adjust the rear brake on a car?
Most FWD vehicles self adjust when braking while the vehicle is moving forward (See Figure 61.4). Once the rears are quick set test drive the vehicle to finish the adjustment process.
What causes rear drum brakes to engage too soon?
If the parking brake system is not de-adjusted properly before the brake shoes are adjusted it will cause the rear brakes to engage too soon. This is especially true of vehicles equipped with duo-servo rear drum brakes (see Figure 61.1).
What causes rear wheel to lock up when braking?
Problem: One or both rear wheels lockup during braking or the rear end of the car squats when braking. Cause: Rear Wheel lockup or squatting has many causes. Here is the list of possible causes: Service and parking brake adjustment. Rear brake hardware. Shoe lands or bosses. GM clip in wheel cylinders. Brake drum condition.