How many horsepower does a Yamaha Virago motorcycle have?
While its 54.1-horsepower peak at 5500 rpm may not seem high, more telling is a torque curve that starts as low and stays as flat as the Gulf Coast of Texas. The Virago engine pumps out 50 foot-pounds at 2000 rpm; it peaks at 54 foot-pounds at 3000 rpm; and it holds above 50 foot-pounds until past 5500 rpm.
Why does my Yamaha Virago keep losing power?
Once the bike is back in use, the sludge-clogged components interfere with the fuel’s bath, and the bike is “starved” of fuel. This causes the motorcycle to sputter and jerk while riding. If the fuel supply has been restricted severely, the bike may lose power completely. Another hidden culprit of poor performance on a Virago is rust.
Is the Yamaha XV 1100 Virago too stiff?
While Yamaha may have reacted to complaints about the cramped riding position, it still has work to do on the rear shock absorbers. Set to the least pre- loaded position, the springs are too stiff for riders under 150 pounds, and the ride is worsened by unsophisticated compression damping.
When did the Yamaha Virago get twin shocks?
In 1984 the Virago’s loins were re-girded accordingly. Twin shocks replaced the original Monoshock rear end, footpegs were mounted way up front on the engine cases, twin chrome pipes flowed from the exhaust ports, and a sissy bar sprouted aft of a more stepped seat. The more American Viragos moved like proverbial hotcakes, and a lesson was learned.
How much horsepower does a Yamaha XV 1100 Virago have?
In this version sold from year 1989 , the dry weight is and it is equipped with a V2, four-stroke motor. The engine produces a maximum peak output power of 62.00 HP (45.3 kW) @ 6000 RPM and a maximum torque of .
Once the bike is back in use, the sludge-clogged components interfere with the fuel’s bath, and the bike is “starved” of fuel. This causes the motorcycle to sputter and jerk while riding. If the fuel supply has been restricted severely, the bike may lose power completely. Another hidden culprit of poor performance on a Virago is rust.
What’s the proper idle RPM for a virago?
F inally, the easy one. Set your idle to the proper number, usually 1,000 rpm for Viragos. This is done with the little wheel screw located on the right hand carburetor. T he above represents about all I know to do to a Virago under the general category of “tuning”, but three other things are worth mentioning.
What are the tire sizes on a Yamaha Virago?
Stock tire sizes are 100/90-19 on the front, and 140/90-15 on the rear. As for stopping power, the Yamaha XV 1100 Virago braking system includes Dual disc size at the front and Expanding brake size at the back.