What oil does a Yamaha Virago 750 take?
Maxum 4 SAE 5W-30 Premium Motorcycle Engine Oil, by Maxima Racing Oils®.
Where is the oil filter on a Yamaha Virago?
The oil filter is located on the right hand side of the bike (note the previous photo for the location). The oil filter is quite simple to remove after the cap has been removed; just pull it out and wipe out the old oil with a rag.
How do you change the oil on a Yamaha Virago 750?
Locate the oil drain plug on the bottom of the motorcycle and place a catch basin directly under it. Remove the drain plug bolt with a socket wrench and allow the oil to drain completely. Replace the drain plug bolt when the flow of oil slows to a trickle.
How much oil does a 1982 Yamaha Virago take?
Virago Specifications
| Engine oil | |
|---|---|
| XV-920 (1981-1982 CHAIN DRIVE) | 8.9 oz (264 cc) |
| XV-920 (1981-1982 SHAFTDRIVE) | 10.2 oz (303 cc) |
| XV-1000, XV-1100 | 12.6 oz (372 cc) |
| Final Gear Oil (SHAFT DRIVE) | .21 qts (200 cc) |
What does a KN 145 oil filter fit?
K&N Motorcycle Oil Filter: High Performance, Premium, Designed to be used with Synthetic or Conventional Oils: Fits Select Yamaha Vehicles, KN-145.
How do you check the oil on a Yamaha Virago?
Turn off the engine and place the bike on the center kick stand. Locate the site glass. It is under the starter and above the shift lever. If the reading shows at halfway or above, then you have enough oil.
What is the difference between SF and SAE oil?
SAE is the Society of Automotive Engineers. They’re the group who sets the viscosity standard, not an actual standard. The API service level is in the top half of the “donut” seal. SE and SF are old standards that have been replaced.
How to change the oil in a Yamaha Virago 750?
Remove the three Allen-head bolts that secure the oil filter cover to the left side of the motor with an Allen key. Pull the retaining clamp and filter cover away from the motor. Remove and inspect the oil filter cover O-rings. Replace them if they are damaged in any way. Pull the oil filter out of the motor and place it in your oil catch basin.
What kind of oil filter does a virago use?
Unlike modern motorcycles, which use a spin-on-type oil filter, the Virago utilizes an older, in-motor filter element to clean the oil. While its not difficult to replace the filter and change the oil, a new Virago rider can be perplexed by the apparent lack of an oil filter.
How big is the engine in a virago?
Virago Specifications Engine oil With Filter Change 3.3 qts (3,100 cc) Without Filter Change 3.2 qts (3,000 cc) Engine Rebuild 3.8 qts (3,600 cc) Front Forks
Can you use DOT 5 brake fluid on Virago?
Dot 5, however, is not compatible and can not be mixed with any of the above brake fluids for it is Silicone based and can not, repeat, cannot be mixed with any of the above brake fluids. It has a distinct color bluish-purplish color. http://www.clearcoproducts. com/dot5-brake-fluid.html
Remove the three Allen-head bolts that secure the oil filter cover to the left side of the motor with an Allen key. Pull the retaining clamp and filter cover away from the motor. Remove and inspect the oil filter cover O-rings. Replace them if they are damaged in any way. Pull the oil filter out of the motor and place it in your oil catch basin.
Unlike modern motorcycles, which use a spin-on-type oil filter, the Virago utilizes an older, in-motor filter element to clean the oil. While its not difficult to replace the filter and change the oil, a new Virago rider can be perplexed by the apparent lack of an oil filter.
What kind of engine does a Yamaha Virago have?
As Yamaha’s first V-twin-powered cruiser motorcycle, the Virago has become a favorite for riders who prefer the bike’s classic lines and nimble handling. Although the Virago was available in a range of engine sizes, the 750cc model is the most commonly seen on the road today.