How much does it cost to replace throttle cables?
A throttle cable replacement usually costs around $50 to $100. To ensure that you’re getting the right fit, enter your vehicle’s year, make, and model in our built-in search function.
What should I do if my throttle cable is not returning?
If the throttle does not completely return the cable may be binding, incorrectly routed, frayed, or corroded, which warrants further investigation. With the bike OFF, twist the trottle open to the stop and let go.
How does two throttle cables prevent the throttle from sticking?
I don’t see how two throttle cables prevents the throttle from sticking. The ONLY thing I see is helping is if the throttle return spring on the carb breaks. If one cable siezes / sticks, then the other cable is going to be stuck, also. It’s all one assembly.
How is the Free Play of the throttle cable checked?
Throttle cable free play is typically checked by measuring the amount of throttle grip movement relative to a fixed point on the throttle cable housing. Most makes/models specify 2-3mm of throttle grip free play.
How do you adjust the throttle on a motorcycle?
Once the decelerator cable has been set, the accelerator cable is adjusted. The accelerator cable tension is usually set so that 2-3mm of free play is present in the throttle grip. Once the correct tension has been applied, the lock nuts should be snugged and any dust covers should be slid back over the adjusters.
Is there a way to remove the throttle cable?
Hence, the DOT requires a mechanical (i.e. not a spring) method of closing the throttle. You can remove said “push” or “idle” cable relatively safely, albeit illegally if you are aware of it’s consequences and the methods of dealing with those. I would simply hit the kill button if it’s ever a problem.
What kind of throttle cable do I need for my Harley Davidson Softail?
This is a modal window. Bob and Mark show you how to install the idle and throttle cables on your Harley Davidson Softail or Dyna model. They recommend using a Barnett performance black throttle cable. Once you have situated the cables, the guys remind you to test to make sure they’re directed in the correct location.
I don’t see how two throttle cables prevents the throttle from sticking. The ONLY thing I see is helping is if the throttle return spring on the carb breaks. If one cable siezes / sticks, then the other cable is going to be stuck, also. It’s all one assembly.
Why do BMWs use push pull throttle cables?
Any weight on a return spring pulls against the riders wrist, hence all the doohickeys like throttle locks and wrist rests for long distance riding. BMW guys also will occasionally put weaker return springs. Push pull with a light spring means that you don’t need a heavy spring pulling against you to close the throttle.