Is there a way to drain a crank case?

Is there a way to drain a crank case?

Pull the cam cover, it will drain all except a few oz in the actual crank area. Take # 25 off, disable ignition , turn engine over with starter, the oil will spray out, clamp off the oil feed line from the oil tank first. Be careful when you put the plug back in it cross threads easy. Colony makes an Acorn nut to replace the stock nut.

Why is oil draining out of my crank case?

In the past it has always cleared itself by dumping out (all over the engine) through the crankcase vent, but this time there is enough oil in the crank case that the starter cannot turn the motor to fire up. Any suggestions short of pulling the motor, removing the jugs and turning it upside down? Thanks in advance for any and all suggestions.

How much oil is in the crank case?

Discussion in ‘ Engine, Fuel and Exhaust ‘ started by Capt’n Jim, Sep 17, 2016 . I have a 1985 FXR that has set up a while (6 months+) and the oil has leaked by the check valve ball and now has about a quart of oil in the crank case.

Is it safe to use sea foam on crankcase oil?

Here’s a quick ‘how and why’ video on adding Sea Foam Motor Treatment to crankcase oil. Sea Foam in motor oil works safe and quick to clean thicker, harmful petroleum deposits and residues that must be dissolved and liquefied in order to drain out during an oil and filter change.

Pull the cam cover, it will drain all except a few oz in the actual crank area. Take # 25 off, disable ignition , turn engine over with starter, the oil will spray out, clamp off the oil feed line from the oil tank first. Be careful when you put the plug back in it cross threads easy. Colony makes an Acorn nut to replace the stock nut.

In the past it has always cleared itself by dumping out (all over the engine) through the crankcase vent, but this time there is enough oil in the crank case that the starter cannot turn the motor to fire up. Any suggestions short of pulling the motor, removing the jugs and turning it upside down? Thanks in advance for any and all suggestions.

Discussion in ‘ Engine, Fuel and Exhaust ‘ started by Capt’n Jim, Sep 17, 2016 . I have a 1985 FXR that has set up a while (6 months+) and the oil has leaked by the check valve ball and now has about a quart of oil in the crank case.

Can a high crankcase pressure cause an oil leak?

Manuals can be found at the manufacturers website.** An abnormally high crankcase pressure can cause oil leaks. The engine crankcase is designed to operate below atmospheric pressure, and the breather valve or pcv (positive crankcase ventilation) valve is the device used to keep crankcase pressure below atmospheric pressure.

How to unstop an oil pump pickup tube without taking?

Replace the drain plug and pour 1 gallon of Berryman B-12 Chemtool or a similar product into the engine oil fill. Do not crank the engine. Let the product sit in the oil pan for 2 days before draining. Drain the solvent out of the oil pan. Replace the drain plug and fill the oil pan with solvent once again.