What should tread depth be on Indian Motorcycle tires?
Measure the tread depth near the center of the thread on both tires. Replace any tire with a tread depth of less than 1/16 inch (1.6mm). Tread wear indicators are located in at least three places on the tread circumference and become visible at a tread depth of approximately 1/16 inch (1.6mm).
When to adjust tire pressure on Indian motorcycle?
Always check and adjust tire pressure when the tires are cold. Using the supplied air pressure gauge, adjust tire pressure to the recommended pressure. See the below table for the recommended tire pressure for your motorcycle. On models equipped with a TPMS, the sensors are located 180 degrees from the valve stem.
What happens if you have the wrong tire on your Indian motorcycle?
Operating your Indian Motorcycle with incorrect tires, incorrect tire pressure or excessively worn tires could cause loss of control or accident. Always use the correct size and type of tires specified by Indian Motorcycle for your bike. Those vary based on model and can be found in the Specifications section of your Owner’s Manual.
What kind of tires do Indian motorcycles use?
Always use the correct size and type of tires specified by Indian Motorcycle for your bike. Those vary based on model and can be found in the Specifications section of your Owner’s Manual. Always maintain proper tire pressure as recommended in the Owner’s Manual and on safety labels.
Always check and adjust tire pressure when the tires are cold. Using the supplied air pressure gauge, adjust tire pressure to the recommended pressure. See the below table for the recommended tire pressure for your motorcycle. On models equipped with a TPMS, the sensors are located 180 degrees from the valve stem.
Operating your Indian Motorcycle with incorrect tires, incorrect tire pressure or excessively worn tires could cause loss of control or accident. Always use the correct size and type of tires specified by Indian Motorcycle for your bike. Those vary based on model and can be found in the Specifications section of your Owner’s Manual.
Measure the tread depth near the center of the thread on both tires. Replace any tire with a tread depth of less than 1/16 inch (1.6mm). Tread wear indicators are located in at least three places on the tread circumference and become visible at a tread depth of approximately 1/16 inch (1.6mm).
How to adjust rear shocks on Indian chief?
Learn how to adjust the rear shocks on your Indian Chief Vintage or Indian Chief Classic. This shows the proper procedures for elevating your motorcycle, measuring the pre-load verse sag weight and adjusting the rear shocks according to riding style to get the most out of your ride. Loading…