Why is my remote start light not working?
The hood is ajar, a CEL light is on, fuel too low, battery too weak, etc etc. To determine what has been happening you’ll need a Tech2 or similar scanner to dig into the BCM and PCM to find the Remote Start Disable History.
Why does my Rs light flash but not start?
2008 GMC Sierra w/ factor RS lights flash but wont start and then 2 or so days later it works again then same it wont what could be the problem Yep. There’s a whole list of stuff that’ll prevent the factory RS from starting your engine. The hood is ajar, a CEL light is on, fuel too low, battery too weak, etc etc.
Why is the start button not working on my Harley Davidson?
If you did NOT read 12 volts, you would have to go back to the TSSM and hot wire (bypass it) in order to determine where the problem was. Also testing the start button would be something to check also. The key point to remember is that the “Start Relay Control” comes from the TSSM.
What causes a car to refuse to remote start?
The hood is ajar, a CEL light is on, fuel too low, battery too weak, etc etc. To determine what has been happening you’ll need a Tech2 or similar scanner to dig into the BCM and PCM to find the Remote Start Disable History. The BCM list has as many as the 8 most recent reasons for refusing to start.
Why does the security light flash when the ignition is off?
On some vehicles, it will flash when the ignition is off, and the OEM security is activated. Its other main purpose is to indicate that the security of your vehicle may have been compromised, and the engine has been immobilized to prevent potential theft. Don’t assume right away that it means someone tried to break into or steal your vehicle.
What does it mean when your car won’t start?
Its other main purpose is to indicate that the security of your vehicle may have been compromised, and the engine has been immobilized to prevent potential theft. Don’t assume right away that it means someone tried to break into or steal your vehicle. In most cases, it means that there is a failure somewhere in the security system.
Why is the security light on on my car?
The security light on your vehicle serves has two purposes. On some vehicles, it will flash when the ignition is off, and the OEM security is activated. Its other main purpose is to indicate that the security of your vehicle may have been compromised, and the engine has been immobilized…
If the ‘Check Engine Light’ or Malfunction Indicator Lamp (MIL) is illuminated, the remote start will not work. Don’t panic, one of the reasons the MIL can illuminate is due to a loose gas cap! Reseal the cap, restart the car, and retry step #1! If none of the other solutions have fixed your problem, try replacing the battery in the fob.
What to do if your remote starter is not working?
Disengage and re-engage ‘P’ before you retry the starting procedure. If you have used the remote starter twice in quick succession, it will not work. Simply insert the key in the ignition and turn it ‘on’ and ‘off’. Exit the vehicle with the fob and retry step #1. If your coolant temperature is near C or your oil is low, you need to be topped up!
Why does my Remote stop working when I push a button?
Batteries are dead in the remote – This is another common problem when your remote starter has stopped working. If your remote has an LED that illuminates when you push a button. If the LED fils to light or is dim, you may just need some new batteries for your remote.
What to do if your car remote stops working?
If your remote has an LED that illuminates when you push a button. If the LED fils to light or is dim, you may just need some new batteries for your remote. Any reputable car audio retailer or jeweler, or even Radio Shack should be able to help you with this.
What happens when the remote starter does not work?
If they no longer flash when you ask your vehicle to lock or unlock using the remote starter controller, you may be in valet mode. If you can lock and unlock your doors just fine but ONLY the remote start does not work, you may be in valet mode.
Why does my Remote not work on my car?
We have found 10 things that will cause your remote start system to not work. Hit the lock button once, then hold the remote start button (Usually shaped like an arrow ) for at least 2 seconds or until the turn signal lamps flash. Keep holding and the vehicle should start.
What should I do if my remote start fails?
If your attempt to remote start the vehicle fails, you might see the parking lights flash a number of times. This is your remote start system telling you what caused the failure to start. The table below outlines what all of the flash sequences mean. Release foot brake or check foot brake input wire. Close hood or check hood pin wire.
How do you turn on a remote car starter?
While in the driver’s seat, close the driver’s side door. Insert your ignition key and turn it to Accessory (or press the start button once without pushing the brake pedal). Press the Lock button on your remote car starter. Within five seconds of turning it on, turn your key back to the “off” position (or press the start button again).