How do you fix a stuck switch on Honda Goldwing?
There is a smallish spring inside (about the size of the springs used in retractable ball point pens) that can and will go boinging away never to be found again unless you are very careful. The switch will separate in two by gently prying four locking latches, two on each side of the switch.
What to do if your Honda speedometer won’t work?
Read on to learn how to fix your Honda’s failing speedometer and odometer. This article applies to the Honda Civic (1992-2002) and Accord (1992-2002).
Why does my Honda switch keep popping out?
This grease (as does all grease eventually) dries up and instead of lubricating the insides of the switch, it ends up gluing everything together, including the little wig-wag. This is what keeps the switch from popping back out when it is pressed.
What does wig wag on Honda Goldwing mean?
When you open the switch, you will find a brass ‘wig-wag’, basically a very small pin shaped like a ‘Z’. When the button on the switch is pushed, the wig-wag moves to one side in a channel on the actuator. This keeps the actuator spring from pushing the actuator back out.
There is a smallish spring inside (about the size of the springs used in retractable ball point pens) that can and will go boinging away never to be found again unless you are very careful. The switch will separate in two by gently prying four locking latches, two on each side of the switch.
Where is the reverse gear on a Honda Goldwing?
NOTE: This guide is specific to the Honda Goldwing gl1800. If you’re riding a gl1500 you’ll have a lever on the left side just below the gas tank and not a button on the handlebars. One distinct advantage that Honda Goldwings have over other heavy cruisers, is the reverse gear.
Why is the reverse light not working on my Honda Goldwing?
The reverse light and gear are closely tied together. If the light doesn’t work, the gear may not either. Make sure to keep both the RVS and Start switches clean. These buttons can be prone to malfunction if they are excessively dirty. Ensure that your actuator cables that control reverse gear are properly lubricated.
What are the advantages of a Honda Goldwing?
One distinct advantage that Honda Goldwings have over other heavy cruisers, is the reverse gear. Why have a reverse gear? Sometimes when you’re parking your motorcycle, you just don’t have a choice and have to park front wheel first in a space that has a sharp incline towards the gutter.
When you open the switch, you will find a brass ‘wig-wag’, basically a very small pin shaped like a ‘Z’. When the button on the switch is pushed, the wig-wag moves to one side in a channel on the actuator. This keeps the actuator spring from pushing the actuator back out.
This grease (as does all grease eventually) dries up and instead of lubricating the insides of the switch, it ends up gluing everything together, including the little wig-wag. This is what keeps the switch from popping back out when it is pressed.
How do you separate a Honda ignition switch?
The switch will separate in two by gently prying four locking latches, two on each side of the switch. When you open the switch, you will find a brass ‘wig-wag’, basically a very small pin shaped like a ‘Z’.