What does the oil light mean on a Harley?
This is a safety light to remind you when the oil pressure is low, you still have to check the oil level regularly.
What should I do if my oil light is blinking?
What I would do is with the engine idling, wiggle the wire plug at the oil pressure switch and see if the light does flicker off and on, so you may need a helper. Then next if it does not is to check the actual oil pressure with a gauge and see if the pressure is truly fluctuating. If so, the problem is most likely with the oil pump.
Why does my oil pressure light blink when I apply brakes?
Got oil changed last week. Now my oil pressure light blinks when i apply brakes. Checked the oil & its above the full line. Took it back to oil change shop & mechanic checked oil level & said its ok but maybe my oil sending unit is failing. That’s usually the problem 99.99% of the time.
Why does the oil pressure warning light keep flickering?
Higher rpms would be associated with turning the steering wheel, AC on, headlights or coolant fans on. with no load at all, I’d guess around 700 rpm. So 500-600 Is a little on the low side. But if the oil pressure warning light still flickers at 1000 rpm, the idle air control is not the most likely explanation.
Is it OK to drive 35 miles with oil pressure light?
Checked the oil & its above the full line. Took it back to oil change shop & mechanic checked oil level & said its ok but maybe my oil sending unit is failing. That’s usually the problem 99.99% of the time. Is it on to drive 35 more miles to dealer or should i have it towed there? Is it Ok to drive?
What does the Check Engine light on a Dyna Glide mean?
The check engine light is designed for a reason; it is there to tell you that there is something wrong with your Harley Davidson Dyna Glide. The dealership will charge you over $100 to read and clear the code for you. The good news is, you can do the very same thing for free.
Higher rpms would be associated with turning the steering wheel, AC on, headlights or coolant fans on. with no load at all, I’d guess around 700 rpm. So 500-600 Is a little on the low side. But if the oil pressure warning light still flickers at 1000 rpm, the idle air control is not the most likely explanation.
How to reset check engine on Harley Davidson Dyna Glide?
Press and hold the trip reset button located on the side of your speedometer. Turn the ignition key to on. Hold the button until the word “diag” appear on the odometer screen, which stands for diagnose. Figure 2. Hold trip button. Figure 3.
Why are both brake lights blinking at the same time?
The hazard light button is essentially an additional power source and switch for the turn signal circuit. With both brake lights blinking, the hazard light circuit may be crosses in as well.