Where is the spark plug on a Honda Spree?
how do i change the spark plug in a honda spree? you can access the plug by reaching in front of the rear tire you will notice the spark plug cap. pull it off and you can get to the plug from that way. Welcome!
What kind of spark plug does a Honda Spree take?
NGK 4632 Spark Plug – BPR6HSA, Each.
How often do you change the oil on a Honda Ruckus?
We have found that oil changes every 1000 miles keeps the Ruckus motor running at top shape. This minimizes deposit buildup and keeps things running smoothly.
What kind of coolant goes in a Honda Ruckus?
You can either buy straight coolant (best value) or pre-mixed stuff (less hassle). If it’s straight coolant then you mix it 50-50. If you flip the seat up then you can remove the cap via the hole in the floorboard….it’s super easy but a funnel might help.
What’s high mileage for a Honda Ruckus?
Excellent gas mileage For reference, it can only hold about 1.3 gallons of gas and it’s rated at 114 mpg, which means that you can get close to 150 miles on a tank of gas. Depending on how often you commute on a Ruckus, and how far you commute is, you might only have to fill it up every week or two.
Where does the spark go on a Honda spark plug?
Projected extended tip, V-power (v-grooved center electrode) NGK’s V-Power design directs the spark to the edge of the electrode where it develops more rapidly, this increases ignitability even in lean burn conditions.
How are V power spark plugs improve ignitability?
V-Power spark plugs are a patented design by NGK to improve ignitability and reduce quenching. Ignitability is improved by directing the spark to the edge of the center electrode thus exposing it to more of the air/fuel mixture.
What’s the difference between V power and standard spark plugs?
You can notice the larger 2.0mm standard center electrode size , but with a unique V design. V-Power spark plugs are a patented design by NGK to improve ignitability and reduce quenching. Ignitability is improved by directing the spark to the edge of the center electrode thus exposing it to more of the air/fuel mixture.
What kind of engine does a Honda Spree have?
The Spree was powered by a 2-stroke 50cc engine that used just a belt drive without a multi-ratio variator like Honda’s other scooters. Accordingly, a properly running Spree tops out at about 30mph and thus is moped legal in quite a few states.
When did the Honda Spree 50cc come out?
It was positioned as Honda’s entry level 50cc scooter, with the larger and more fully featured Aero 50 slotted in as their premium 50cc offering. From 1984 to 1987 the Spree was offered in both the USA and Canada.
When did the Honda Spree get a new logo?
After 1987 the Spree was replaced by the Honda Elite E/ES, which shared the same motor. For the 1985 model year, Honda redesigned the Spree logo on the side panel. The new logo was much larger. The white Spree above shows the original logo, and the other photos show the new larger logo.
How much does a Honda Spree scooter cost?
After the run was over for the Spree, Honda continued to use this engine for a few more years in the Elite E / ES scooter. There were several differences though including: The Spree was a simple and bare bones scooters. This was apparent in both the price ($398 in 1984) and weight (85-94 lbs).