What does the code P2004 mean on a car?

What does code P2004 mean? Code P2004 stands for Intake Manifold Runner Control Stuck Open Bank 1. The intake manifold directs air into the engine via a series of runners. To improve engine performance, many late-model vehicles use what’s referred to as an intake manifold runner control (IMRC) system.

What is the trouble code on my GMC Sierra?

One of the most common trouble codes with the GMC Sierra is the P0455 code. This trouble code references a number that is given to you when you plug your Sierra into a OBDII scanner. P0455 Indicates t

Why does my GMC Sierra have a p0455 trouble code?

There are many things that can cause the P0455 trouble code to trigger in your GMC Sierra. Here are the most common problems that will throw the code: Evap System Hose – The hose that carries the fuel vapor from the fuel tank to the intake manifold can begin to leak. This will cause the P0455 code. Look for either a tear or hole in it.

What kind of leak does a GMC Sierra have?

Please try again later. 2007 gmc sierra with a 5.3l, check engine light on with a p0455 evap gross leak trouble code stored, this video shows how to identify and locate an evap system leak using a smoke machine and bi-directional controls on a scantool (to close the vent), hope you enjoy thanks for watching. Loading…

What does the P2004 Ford engine light mean?

Engine Light ON (or Service Engine Soon Warning Light) P2004 FORD Meaning The Intake Manifold Runner Control (IMRC) is an electrically actuated system consisting of a motorized actuator with an attaching linkage for each housing on each bank. The linkage attaches to the housing butterfly plate levers.

What causes an intake manifold code of P2004?

Code P2004 is typically caused by one of the following: A failed IMRC actuator A problem with the intake manifold or linkage Wiring issues

What does code p2005 mean on engine vacuum?

Note: It’s also a good idea to check the vacuum hoses on system that’s controlled by engine vacuum. P2005: Code P2005 indicates the PCM determined the bank 2 IMRC actuator is stuck in the open position. P2006: Code P2006 indicates the PCM determined the bank 1 IMRC actuator is stuck in the closed position.

What does Bank 1 Bank 2 bank P2004 mean?

Bank 1 refers to the side of the engine with the #1 cylinder, whereas bank 2 refers to the side of the engine with the #2 cylinder. Inline engines, have only one bank – bank 1. Code P2004 is typically caused by one of the following: Sometimes P2004 can pop up in error. Clear the code and see if it returns.

When to use the P2004 trouble code on a PCM?

The PCM may store the P2004 trouble code if the IMRC butterfly valve plates become detached from the IMRC actuator. This code may be resolved quickly by checking the connection of the IMRC butterfly valve plates and the IMRC actuator.

What causes a P2004 code to pop up?

Code P2004 is typically caused by one of the following: Sometimes P2004 can pop up in error. Clear the code and see if it returns. If it does, the next step is to perform a visual inspection. A trained eye can check for issues such as broken wires and loose connections. If a problem is found, it should be repaired and the code cleared.

When to use the P2004 trouble code on an intake manifold?

Repairing or replacing IMRC solenoid connector that is corroded. Replacing IMRC butterfly valve plates (in order to do this, the intake manifold assembly will need to be replaced) The PCM may store the P2004 trouble code if the IMRC butterfly valve plates become detached from the IMRC actuator.

Code P2004 is typically caused by one of the following: A failed IMRC actuator A problem with the intake manifold or linkage Wiring issues

What does The P2008 OBD2 diagnostic code mean?

All our repairs are backed by our 12-month / 12,000-mile warranty. The P2008 code is a general OBD2 diagnostic trouble code referencing the Intake manifold runner control circuit. This code is similar to P2005, P2006, P2007, P2009, P2010 and P2015. P2008 means that the intake manifold runner circuit has an open electrical connection bank 1.

What happens if you leave the P2008 code unattended?

The P2008 code can have a serious side effect if left unattended for too long. The intake manifold runner flaps can break off and be sucked into the engine. This can cause extensive engine damage. What repairs can fix the P2008 code? In some cases an intake cleaner can be used to help free any stuck manifold runner flaps.

What should I do if my P2004 code pops up?

Sometimes P2004 can pop up in error. Clear the code and see if it returns. If it does, the next step is to perform a visual inspection. A trained eye can check for issues such as broken wires and loose connections. If a problem is found, it should be repaired and the code cleared.

What does variable tumble shutter valve on Mazda P2004 mean?

P2004 MAZDA Meaning The Powertrain Control Module (PCM) monitors mass the variable tumble shutter valve using the variable tumble position sensor.

How much does it cost to repair a Mazda P2004 code?

The cost of diagnosing the P2004 MAZDA code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

What was the code for the P2004 intake manifold runner?

2009 Doge Journey SE, 2.4L V4 with 87000 miles Code 1 � p2004 “Intake Manifold Runner Control Stuck Open Bank 1” – I replaced the intake manifold runner control valve. It was relatively easy. 3 bolts and 1 connector.

P2004 MAZDA Meaning The Powertrain Control Module (PCM) monitors mass the variable tumble shutter valve using the variable tumble position sensor.

What is the code for check engine light?

This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation. Our certified mobile mechanics can come to your home or office to perform the Check Engine Light diagnostic for $0.0 .

What causes a P2004 engine to not run?

For the most part, the biggest danger of this error code is poor performance and fuel efficiency. If your cylinder head has all the cylinder valves connected, then your engine may not run at all. The problem with one cylinder may be causing all the cylinder not to fire.

What are the symptoms of a P2004 intake manifold code?

Symptoms of a P2004 code may include: Reduction in engine performance, especially at low RPM levels Possible causes for this engine code include: Loose or binding intake manifold runners Bad intake manifold runner position sensor Open or shorted wiring in the IMRC actuator solenoid control circuit Corroded IMRC actuator solenoid connector face

What does the P2004 diagnostic trouble code mean?

All our repairs are backed by our 12-month / 12,000-mile warranty. The P2004 diagnostic trouble code indicates that the intake manifold runner control (IMRC) is stuck in the open position on Bank 1.

What causes a P2004 code on an inline engine?

Inline engines, have only one bank – bank 1. Code P2004 is typically caused by one of the following: Sometimes P2004 can pop up in error. Clear the code and see if it returns. If it does, the next step is to perform a visual inspection. A trained eye can check for issues such as broken wires and loose connections.

Navigation