How to install a backup camera in a GMC Sierra?
Lay the cable from the back of the truck to the front and make sure it’s the right length. Connect the camera to the monitor and check that they work. If everything is okay, then move on to step two. Step 2: Install this GMC Sierra and Chevrolet Silverado backup camera.
What’s the best way to install a rear view camera?
Attach 1 of your bare wire cables to the camera cord’s power connector. Then, poke your bare wires through the center of the exposed reverse light wires and twist them together. For safety, make sure you wrap the combined wires in electrical tape.
How to replace rear view mirror in GMC Sierra?
If it appears a little stubborn, then insert a small Allen key on the lower side between the mirror and the hook on the windshield, and pull the mirror out. Step 5: Replace with mirror monitor. Now replace the old mirror with our new replacement rear view mirror monitor and make sure it sits tight.
Where is the reverse wire for a backup camera?
Re: Reverse wire for backup camera. Here you go. This is where you get power and the Reverse signal for the camera. It is called the MBEC and is located just to the left of the gas pedal. Pull the cover off to expose the wiring under it. Disregard my wiring and markings on the photo.
How does a GMC Sierra backup camera work?
Very pleased. Easy to use. Connects with my phone or tablet. View is clear. Saves time. I have no issues with the backup camera. It had helped me line up to my goosenecks and 5th wheel many a time. It’s easy to use, connect to your device, I’ve used two different iPhones with no issues.
Attach 1 of your bare wire cables to the camera cord’s power connector. Then, poke your bare wires through the center of the exposed reverse light wires and twist them together. For safety, make sure you wrap the combined wires in electrical tape.
Do you need a backup camera for a Silverado?
If you have an older vehicle this is your back-up solution. Instead of 3 to 5 tries to line-up on your hitch, this thing can do it after 1 or 2 attempts by yourself. Something a built in camera cant do is that you can put the camera on your trailer and alighn yourself from the trailer view.
Re: Reverse wire for backup camera. Here you go. This is where you get power and the Reverse signal for the camera. It is called the MBEC and is located just to the left of the gas pedal. Pull the cover off to expose the wiring under it. Disregard my wiring and markings on the photo.