How to start suzuki gs 500?
Whack the choke on full and start the bike up, (hold starter – perhaps give a quick blip of the throttle to help ease it to start) once started let it run on the choke, obviously lower the choke so the bike is running without screaming at high rev’s just keep it ticking over nicely.
How fast does a Suzuki gs500 go?
Suzuki GS500
1997 Suzuki GS500E | |
---|---|
Manufacturer | Suzuki Motor Corporation |
Bore / stroke | 74.0 mm × 56.6 mm (2.91 in × 2.23 in) |
Compression ratio | 9.0 : 1 |
Top speed | 185 km/h (115 mph) 159 km/h (99 mph) 169 km/h (105 mph) |
Is a gs500 fast?
It isn’t the fastest bike but it is still fast compared to cars and will out accelerate 95% of cars if needed. And it’s a very very fun bike to ride.
Is the GS500 a good bike?
Suzuki GS500 Bike Overview The GS500 is the ideal first bike if you are after something more than a 125cc scooter. It is a responsive bike which is forgiving and flexible, with just enough power to get a little fun out of riding but without running the risk that the bike will get away from you.
Why is my GS500 engine not working properly?
Which apparently is common in the GS500 engine. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.
What to do when your GS 500 is stuck?
One side needs to be taken off so the rod piston pin can slip through the side. Mine were stuck, so I soaked a rag in hot water, rung it out and wrapped the piston with it to allow the aluminum to expand allowing the pin to slip through easier.
Is there a cam end float in the GS500?
The research that i found leads me to believe its cam end float. Which apparently is common in the GS500 engine. If playback doesn’t begin shortly, try restarting your device.
How many bolts are on a GS 500?
There are a total of 8 bolts on top, 1 in front, and of course the spark plugs need to come out. The front bolt comes out first. The 8 bolts are numbered 1-8, and need to be loosened backwards and a little at a time. The block may need a little tapping with a rubber mallet, but it should just slip right up off the rods.
What are the most common problems with the GS500?
I sat down on a brand new one at the dealership (and a ninja, and a Katana, and an SV640, and a GSX-R600 to humor the salesman) I liked the way the Ninja felt because it sat lower, all the other ones just intimidated the hell out of me, but sitting down on the GS I felt like the two of us could have some exciting times ahead.
Is the GS500 a good bike to buy?
The GS is one of the most reliable least maintenance required bikes and thus one of the most loved. Dollar for mile you can’t go wrong. These bikes are so inexpensive and so trustworthy. Few bikes can offer such cheap thrills. Parts are easy to find also.
What to do if your GS500 tank leaks?
Tank sealant covers surface rust and arrests the rusting process before it becomes terminal. Ie, you shine a flaslhight in your tank and it looks rusty. If your tank leaks, I would not bet on it. Of course you have to do it right, else it is a worse problem than you started with.
What kind of tank sealant do you use on a GS500?
POR-15 is the other tank sealant. Most prefer this one over Kreem. Check the oil on a regular basis. Air cooled engines use more oil. Common sense in not very common. Re: What Are The GS500’S Most Common Problems? Tank sealant covers surface rust and arrests the rusting process before it becomes terminal.