Why is fuel leaking from the quick disconnect fitting?
As soon as the key is turned on the fuel line will pressurize that is if the fuel pump is working correctly. The bike will not start without the fuel line being pressurized. I know you tried this but just in case you didn’t you have to pull down the quick disconnect fitting on the tank for it to seat correctly.
Is there a fuel line leak on a Harley Davidson?
Check it out… Fuel Leak from fitting – Harley Davidson Community Click to expand… Thanks! If everyone would spend just 5 minutes learning what’s in the Self Help Tips section, they’d be amazed what’s in there! Thanks! If everyone would spend just 5 minutes learning what’s in the Self Help Tips section, they’d be amazed what’s in there!
What to do if your gas tank is leaking?
Put the tank back on, plug in quick connect gas fitting and it starts leaking. I disconnect it and there is still a drip. I look up into it with a flash light and see an O ring. End up draining the tank completely and turning the tank upside down on my workbench.
As soon as the key is turned on the fuel line will pressurize that is if the fuel pump is working correctly. The bike will not start without the fuel line being pressurized. I know you tried this but just in case you didn’t you have to pull down the quick disconnect fitting on the tank for it to seat correctly.
How do you fix fuel line quick connect?
Unplug the connection and wipe some grease on the male end. Plug it in and out a couple times. That lubes and softens the o-ring in the bung. I don’t think that o-ring is in the parts book either.
Check it out… Fuel Leak from fitting – Harley Davidson Community Click to expand… Thanks! If everyone would spend just 5 minutes learning what’s in the Self Help Tips section, they’d be amazed what’s in there! Thanks! If everyone would spend just 5 minutes learning what’s in the Self Help Tips section, they’d be amazed what’s in there!
Put the tank back on, plug in quick connect gas fitting and it starts leaking. I disconnect it and there is still a drip. I look up into it with a flash light and see an O ring. End up draining the tank completely and turning the tank upside down on my workbench.
Why is my fuel line leaking on my Harley?
The service manager said to make sure the o ring in the check valve was seated correctly before changing it. I did check it and spin it around with a hook pick, it improved but would still seep out very slightly. So I pulled the pump (again) and installed the new check valve. I guess the new quick disconnect Harley uses is a one time use part…..
Why does my fuel tank leak after disconnecting?
Fuel leaking from quick disconnect fitting HELP!! Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge! So Im putting my bike back together from my stereo install. Put the tank back on, plug in quick connect gas fitting and it starts leaking. I disconnect it and there is still a drip.
When does fuel leak out of the quick release?
Discussion in ‘ Engine, Fuel and Exhaust ‘ started by 90FXRS, Oct 22, 2017 . I noticed a stain on the primary. Then I notice fuel leaking out of the quick release when the I turn on the bike.
How do you remove a fuel line fitting?
Push the chrome ring up as far as possible so the retention ball bearings retract fully, then gently remove the fuel line fitting. I feel strongly that the retention ball bearings will raise the burrs I discovered if care is not exercised when removing and installing the fittings.
How to quick disconnect fuel line fittings on Amazon?
Motion Pro Fuel System Quick Disconnect Coupling – 5/16in. ID 12-0047 by Motion Pro . Only 5 left in stock – order soon. . . Only 11 left in stock – order soon.
How do you separate fuel lines in a Ford Ranger?
Slide the tool back to unseat the garter spring on the fitting, and pull back on the fuel line to separate them. This type of removal tool snaps over the line. Slide the tool back to unseat the garter spring on the fitting, and pull back on the fuel line to separate them. Be sure to check the O-rings for damage; replace them if necessary.
What to do if your fuel line is leaking?
Double check it. Now pressurize the vehicle back up, so put the fuse back in the fuse panel for fuel pump, turn the key on, let it prime, maybe start the engine, check it out from underneath here with a bright flashlight. No leaks … You’re good to go.
Which is the best fuel line quick disconnect tool?
. Master Disconnect Set 22Pcs With Glove, Master Quick Disconnect Tool for Automotive AC Fuel Line Transmission Oil Cooler Line Disconnects,Scissor Type Remover,Compatible With Most Ford Chevy GM Models . . . .
What happens when you disconnect fuel line fitting?
Anytime you disconnect a fuel line that is a compression or press quick-release type fitting, you want to make sure that you depressurize the fuel system. So I pulled the fuse on this particular vehicle, ran the engine until it ran out of gas.
How do you disconnect a fuel line in a Ford Ranger?
If the tool is not on hand, go onto step 2. Align the slot on the push connector disconnect tool with either tab on the retaining clip. Pull the line from the connector. 2) If the special clip tool is not available, use a pair of narrow 6-inch slip-jaw pliers with a jaw width of 0.2 in (5mm) or less.
How does a fuel line repair kit work?
Fuel Line Repair Kit When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures. The fuel line connector attaches the flexible fuel lines to the fuel pump, fuel filter, and other related fuel system components.