How to remove a seized swingarm pivot bolt?
Usually they dont take this, but when the end of the pivot bolt splits open from pounding on it, its at the point of now return. Local motorcycle service shops send broke or damaged parts beyond their shops capabilities for me to repair them when possible. No real magic hear, just using tools that are appropriate for the job at hand. Loading…
How much does it cost to remove a swingarm axle?
There are two “special” tools that are needed, (to purchase, or to make), to remove the swingarm pivot axle. The cost of one of those tools is between $50 – $90, (a socket to remove the pivot axle locking nut). The other tool is a 19mm, (3/4″), hex head, (Allen wrench), socket. The hex head wrench costs around $18 – $20 at a local Napa store.
How much does it cost to remove a pivot axle?
There are two “special” tools that are needed, (to purchase, or to make), to remove the swingarm pivot axle. The cost of one of those tools is between $50 – $90, (a socket to remove the pivot axle locking nut). The other tool is a 19mm, (3/4″), hex head, (Allen wrench), socket.
What’s the best way to reinstall a swingarm?
Use lots of grease; there is plenty of room inside the swingarm. Lightly grease the pivot sleeve and reinstall it through the bearings. Reinstall the plastic rings after wiping any crud off of them. 14) Reinstall the swingarm by supporting the swingarm with one hand and feeding the pivot shaft through from the right side of the bike.
Usually they dont take this, but when the end of the pivot bolt splits open from pounding on it, its at the point of now return. Local motorcycle service shops send broke or damaged parts beyond their shops capabilities for me to repair them when possible. No real magic hear, just using tools that are appropriate for the job at hand. Loading…
There are two “special” tools that are needed, (to purchase, or to make), to remove the swingarm pivot axle. The cost of one of those tools is between $50 – $90, (a socket to remove the pivot axle locking nut). The other tool is a 19mm, (3/4″), hex head, (Allen wrench), socket. The hex head wrench costs around $18 – $20 at a local Napa store.
What’s the best way to remove nuts from a swingarm?
The easiest way to remove the 19mm nuts is to “lock” them in place with a 19mm open-end wrench, then spin their corresponding bolt heads with a 17mm socket, extension, and breaker bar (or ratchet + piece of pipe). 4) Slide something under the swingarm to hold it up (like a milk crate) and remove the lower shock bolt and upper tie rod bolts.
There are two “special” tools that are needed, (to purchase, or to make), to remove the swingarm pivot axle. The cost of one of those tools is between $50 – $90, (a socket to remove the pivot axle locking nut). The other tool is a 19mm, (3/4″), hex head, (Allen wrench), socket.