How tight should my snowmobile track be?
With around 1-1/2 inch of track deflection with a small amount amount of force pushing down on the track (16 lbs per the manual), that seems to be a good balance of loose enough but not too loose.
How do you adjust the Polaris khaos shocks?
For the new Khaos shocks changing the High and low speed compression the two clickers (inside and outside knob) are in the same spot. The Red outside clicker is for “High speed” and clockwise increase compression, counterclockwise for decreased.
What factor must be considered when adjusting the suspension on your snowmobile?
Set them at a height so that you can steer and operate the controls comfortably, minimizing strain on your arms. Adjust the ski suspension and the front and rear of the track suspension to match your weight and riding style. Adjust the tilt of the headlight according to the load distribution on your machine.
What happens if snowmobile track is to tight?
You’d lose a good inch or so if they’re not. Make sure you have loosened the bolts on the rear wheels so the shaft can slide forward. You may have to use a rubber mallet to get them to go forward as they do tend to stick sometimes.
Where can I find Polaris snowmobile track fitment guide?
Welcome to our Polaris snowmobile track fitment guide. The fitment information comes directly from Camso – Camoplast. Its meant to serve as a general fitment guide. Use it to shop with confidence for your replacement snowmobile track.
How can I Find my Polaris snowmobile model?
The guide lists Polaris snowmobile models in alphabetical order. So your first option is to search by simply scrolling down looking at the left hand column for your model of sled and then checking the year column for the correct year.
What are the dimensions of a Polaris snowmobile?
It lists the model and year; original length, width, lug height dimensions and pitch for most Polaris snowmobiles. This will provide you with key information for selecting the correct replacement track for your Polaris snowmobile. The guide lists Polaris snowmobile models in alphabetical order.
How can I search for a Polaris sled?
The search feature only needs one key word concerning the model of Polaris sled you are searching for. For example, if you have a IQ model, type in IQ and the table will show you all IQ models. This will narrow down the number of models on the chart.
Is there track tension on my snowmobile?
I checked the track tension, that was fine, havent checked the chain tension, track clips are all there. When it leaves piles if snow, it looks like it slipping, because the piles will be about 2 ftt from teach other, as fast as I go. I’ll check it this next weekend, I’m still down in Indianapolis til this weekend for college.
What causes track to slip on snowmobile skid?
While you’re changing your skid check your drive shaft cogs and your track nubs where the cogs drive the track (don’t know how to explain it better). Sometimes these nubs get worn out and that would cause your track to slip. check the sides of the drive belt to see if there are any burn spots.
Where do you hang track on a snowmobile?
Block up the rear of the sled so the track hangs free- you should have around 1″ to 1 1/2″ of free hang between the slides and track in the middle of the rail. If it seems too loose tighten the adjusters on the rear axel. Also, check for damaged/ missing track clips.