Is a stator a voltage regulator?
The name of this part is appropriate, as a regulator rectifier regulates and rectifies voltage. Your bike’s alternator stator coil produces AC voltage. In any case, the regulator rectifier converts the AC power into DC power, then regulates the DC power to ensure that the power doesn’t go over around 14.5 volts.
Why would a stator go bad?
To answer why stators fail, it is because the coating on the windings breaks down, usually because of heat, causing a short which can also burn the fine wire of the winding in two at the short causing an open circuit. The way to prevent failures is to prevent the heat.
Are there any problems with the Kawasaki Vulcan 900?
This issue occurs most often on the Kawasaki Vulcan 900. The drive pulley on the Vulcan drives the belt, and most owners facing the problem experience noises coming from the belt. When it comes to these Drive Pulley problems on the Vulcan, it can indicate issues with different components.
When did the Kawasaki Vulcan’s come out?
With a history dating back to the ’80s, the Kawasaki Vulcan models have undergone performance upgrades that make them a big player in the cruiser market. Other than the Vulcan S, Kawasaki has great models in the Vulcan range.
What makes a Vulcan 900 make a squealing noise?
Problems with the drive pulley will usually show themselves as noises coming from the belt. It sounds like the belt is rubbing up against something and producing a squealing noise. Owners of the Vulcan 900 who came across this problem stated that it showed up after the bike had fallen or had gotten into an accident.
When to change drive pulley on Kawasaki Vulcan?
Drive pulley problems usually occur between 2,000 miles and 9,000 miles on the Vulcan 900. Swapping out the belt for a new one can work, but the tension must be just right when installing the new drive belt. So it is recommended to have a mechanic or dealership deal with the installation.
This issue occurs most often on the Kawasaki Vulcan 900. The drive pulley on the Vulcan drives the belt, and most owners facing the problem experience noises coming from the belt. When it comes to these Drive Pulley problems on the Vulcan, it can indicate issues with different components.
With a history dating back to the ’80s, the Kawasaki Vulcan models have undergone performance upgrades that make them a big player in the cruiser market. Other than the Vulcan S, Kawasaki has great models in the Vulcan range.
Problems with the drive pulley will usually show themselves as noises coming from the belt. It sounds like the belt is rubbing up against something and producing a squealing noise. Owners of the Vulcan 900 who came across this problem stated that it showed up after the bike had fallen or had gotten into an accident.
Drive pulley problems usually occur between 2,000 miles and 9,000 miles on the Vulcan 900. Swapping out the belt for a new one can work, but the tension must be just right when installing the new drive belt. So it is recommended to have a mechanic or dealership deal with the installation.