How do you change a tire on a Harley Davidson Sportster?
Harley Davidson Sportster wheel. Raise the bike using your jack. Place it right in the middle of the motorcycle and raise it. Starting with the front wheel, remove the two bolts holding the brake caliper in place. The two bolts are connecting the brake caliper to the slider assembly.
How do you remove brake pads from a Harley Davidson Sportster?
Squeeze the caliper against the rotor to compress the pistons, but don’t bend the rotor. You only need about an 1/8th of an inch of compression. Now remove the slide pin with a 3/16 Allen socket. Once removed, the brake pads can be easily slid out of the caliper.
What are the specs for a Harley Davidson Sportster?
The specs are as follows: Early 1990’s to 2005 use a 3/4″ axle. Torque it to 62 ft/lbs. 2005 to 2007 use a solid axle. Torque it to 75 ft/lbs. 2008 and up use a hollow axle. Torque it to 100 ft/lbs. Make sure the castle nut slot lines up with the safety pin hole in the rear axle and slide the safety pin through the slot.
Harley Davidson Sportster wheel. Raise the bike using your jack. Place it right in the middle of the motorcycle and raise it. Starting with the front wheel, remove the two bolts holding the brake caliper in place. The two bolts are connecting the brake caliper to the slider assembly.
How tall is a 2003 Harley Sportster 883c?
The OE double seat is included also. 2003 Harley 883C 100th Anniversary This is a nice bike one of our service personnel decided to sell. We purchased it from him so it’s free and clear and ready for a new owner! Some quick Specs: Dry weight: 489.4 pounds Seat height: 27.6 inches If adjustable, lowest setting.
What is the manual for a Harley Davidson Sportster?
The Cyclepedia Press LLC 1991-2003 Harley-Davidson Sportster 883 and Sportster 1200 online service manual features detailed full-color photographs and wiring diagrams, complete specifications with step-by-step procedures performed and written by a professional technician.
What kind of paint scheme does a Sportster 883r have?
Description 100th Anniversary XL 883R Sportster The Sportster 883R caught a few by surprise last year when it came barreling down the pavement. A quick glance might have made you think a Harley Grand National dirt track bike was doing a victory lap around the block. With its orange and black racing paint scheme.
What happens when you take the rear tire off a Harley Davidson?
As you yank the axle out, the wheel will drop, as will the left and right axle spacers. Keep track of them as one is thicker (left) then the other (right).
How do you put a right spacer on a tire?
Have a smoke/beer/optional activity. Sit back on the garage, driveway/kitchen floor, and place said foot back under said tire. As you lift it, wrap the belt back around the rear sprocket, and pull it backwards, taking most of the slack back out of it. Take weight off tire/rim, and push axle through right bearings, and place right spacer on axle.
What’s the best way to remove a rear tire?
Life the tire/wheel combo onto the top of your right foot/toes back in place. Slide wheel/tire to right. Put in the left wheel spacer. Get the tire/wheel in place, and hold the axle in your left hand. Yes, it’s greasy.
As you yank the axle out, the wheel will drop, as will the left and right axle spacers. Keep track of them as one is thicker (left) then the other (right).
When do I need to change the belt on my Sportster?
Always check it when doing service. If you need to change it, grab your laptop, service manual, tools, parts, buddy and get to it. ***** The service manual states you should follow your negation cable down from battery and remove nut that secures the connector to ground stud on the crankcase boss behind the starter motor assembly.
Have a smoke/beer/optional activity. Sit back on the garage, driveway/kitchen floor, and place said foot back under said tire. As you lift it, wrap the belt back around the rear sprocket, and pull it backwards, taking most of the slack back out of it. Take weight off tire/rim, and push axle through right bearings, and place right spacer on axle.