How to stop coolant leak on Royal Star Venture?

How to stop coolant leak on Royal Star Venture?

Thanks in advance. i would order new rubber plugs from Yamaha,and replace. but the quick fix is to put a coin over the rubber plug and put the fins back on. The thickness of the coin is enough usually to stop the leak, Ive read of several guys that put the coin in years ago and havnt had a leak since.

What kind of engine does a Royal Star Yamaha have?

The Yamaha XVZ1300A Royal Star is beautifully finished. The chrome glitters, the paint is thick. The Yamaha XVZ1300A Royal Star’s engine is so understressed that it’s difficult to imagine any mechanical problems affecting it for at least 50,000 miles.

Is the Royal Star a cruiser or a cruiser?

Even for a cruiser, the Yamaha XVZ1300A Royal Star handles like a jelly burglar’s swag bag. There’s hardly any ground clearance, the bike steers slower than the QE2 and the riding position is akin to a dentist’s chair.

Is the xvz1300 Royal Star a good car?

Nothing to dislike in the engine department, pulls strongly, decent mpg. Extremely well built, at 14 years old it is proven totally reliable, with the paint work still fresh and the chrome gleaming. A huge comfy seat, could do with heated grips, but less that, nothing missing, plus a shaft drive to boot. Bagger on steroids!

What causes the coolant to leak from the engine?

This belt connects to the engine crankshaft, but this part is subject to corrosion and leaks. The water pump itself can also suffer from external damage that leads to a leak. Either way, if the pump isn’t working right, the coolant can’t move properly, which will cause the engine to overheat.

What’s the best way to find a coolant leak?

If you can’t find any leaks, the best way to find a coolant leak is to use a tool that pressurizes the coolant system when the coolant is cold. A tool that I can recommend for this task is the Stant Cooling System AndPressure Cap Tester Link to Amazon . In all my troubleshooting of coolant leaks, I use a tool like this.

How much does it cost to fix a coolant leak?

Cost to Fix a Coolant/Antifreeze Leak. The cost to repair a coolant leak is relative to what’s wrong with the system. A new clamp or hose might not cost you much, but an entire radiator replacement might cost between $300 and $1,200 for parts and labor, while head gasket repair can easily cost $2,000 or more.

How do you drain coolant from a Venturer?

The first step in draining the coolant was to remove the radiator cap shown here. Not a bad idea to put a rag around this if the bike is still warm and then open slowly to remove any pressure. This stuff can get pretty hot quickly.

Thanks in advance. i would order new rubber plugs from Yamaha,and replace. but the quick fix is to put a coin over the rubber plug and put the fins back on. The thickness of the coin is enough usually to stop the leak, Ive read of several guys that put the coin in years ago and havnt had a leak since.

How big is the coolant reservoir on a Yamaha Venturer?

The next picture is what your after. After this has been drained reinstall the spring and floorboard and it’s time to refill with new coolant. The book says the total capacity is 3.7 quarts (US) and the coolant reservoir is .89 quarts (US).

Where is the coolant leak on my snowmobile?

There was some coolant on the floor under the machine (about 1/3 of a qt.). Last week I had ridden it and the coolant tank was full. I checked all hoses and connections that I could possibly see and feel, but could not locate the leak.