What is the F1 light on GSXR 1000?
The “FI” fuel injection warning light usually comes on with many gixxers when the “SET Valve” is not working properly! Your bike will run just fine, but it’s just very annoying to see it while you’re riding!
What does F1 mean on my Hayabusa?
It an FI light. Fuel injection.
What does F1 mean on Suzuki Boulevard?
1 Related Answer The FI light refers to F uel I njection. The sensors on the fuel injection system have detected a problem. It could be anything from a dirty air filter to fuel mapping errors. You need to take the bike to a dealer and have them hook up a code reader.
What are the fault codes for Suzuki motorcycles?
The CKP sensor wiring and mechanical parts. (CKP sensor, wiring/coupler connection) c13 Intake air pressure sensor malfunction The sensor produces following voltage. (0.5 V < or = sensor voltage < 4.85 V) Without the above range, c13 is indicated.
What is the diagnostic code for a Suzuki check engine light?
Follow scan tool manufacturer’s operating instructions to access the Diagnostic Trouble Codes (DTC’s). Remember, these are manufacturer specific codes only. Refer to our Generic OBD II code list for definitions on all other Suzuki diagnostic trouble codes. Manufacturer Specific Codes P1250EFE Heater Circuit Fault
Why does my Suzuki Volusia have a fi light?
So I’m thinking if you get repeated fi lights, and all it ever shows you is C00, it is not caused by a fault code, something else is causing the fi lite to illuminute. The fi light is used for two purposes, one, as we’ve discussed, is to inform you of a fault code stored in the odometer display, there are about 30 codes.
What happens when a diagnostic code is thrown on a Suzuki Volusia?
The fi lite will stay on until the code is downloaded (paper clip or factory switch). The fi lite will illuminate again if the anomaly that caused the code is not fixed, (it will just throw the same code again).
Follow scan tool manufacturer’s operating instructions to access the Diagnostic Trouble Codes (DTC’s). Remember, these are manufacturer specific codes only. Refer to our Generic OBD II code list for definitions on all other Suzuki diagnostic trouble codes. Manufacturer Specific Codes P1250EFE Heater Circuit Fault
So I’m thinking if you get repeated fi lights, and all it ever shows you is C00, it is not caused by a fault code, something else is causing the fi lite to illuminute. The fi light is used for two purposes, one, as we’ve discussed, is to inform you of a fault code stored in the odometer display, there are about 30 codes.
What is the F1 code on a Suzuki GSXR 1000?
Click to expand… This is weird, after riding my 2002 GSXR-1000 over 19,000 miles I get the F1 code C46. I follow the directions according to the link which the white connection was still plugged up to the Servo and splice the other two wires B/R & R/B. Code is gone which I tested this after for over 1 hour.
The fi lite will stay on until the code is downloaded (paper clip or factory switch). The fi lite will illuminate again if the anomaly that caused the code is not fixed, (it will just throw the same code again).