How do you test a harley ignition switch?
Remove the dash and turn it upside down and take a look at the switch . Is the harness plugged into the switch ? it’s a 3 wire connector . Test for voltage at the red wire , it should read battery volts .
What is a harley FLHTCSE?
FLHTCSE incorporates all Electra Glide Classic FLHTCI model updates for model year 2004, and includes the following additional standard features: Custom Colors: Candy Cobalt and Starlight Black or Orange Pearl and Jet Black with matching pinstripes and Harley-Davidson graphics.
Can I start my Harley without key fob?
STARTING YOUR HARLEY-DAVIDSON WITHOUT YOUR FOB! Immediately hold both turn signal indicators until FIVE dashes appear in the odometer gauge. Select the first digit of your PIN (a) by pressing the left turn signal button (a) times. Press the right turn signal switch one time to move to the next digit.
What is a 2004 Harley Davidson worth?
Values
| Suggested List Price | Average Retail | |
|---|---|---|
| Base Price | $13,935 | $4,580 |
| Options (Add) | ||
| Total Price | $13,935 | $4,580 |
What happens if you have an ignition switch problem?
However, if your car has ignition switch problems, you may not be able to start the car at all. Ignition switch problems can also cause issues on the road, such as unexpected shutdowns or electrical problems. To be sure, ignition switch problems are no fun, especially if they’re stopping you from getting to work or school or play.
How is the ignition switch connected to the car?
The ignition switch itself is connected to the ignition cylinder by a shaft or lever. Inside the ignition switch, several contacts connect vital electrical systems needed to start and run the car.
What are the red and yellow wires on an ignition switch?
The yellow and brown wires are related to the ignition. The red ones are for the battery. Strip down the battery wires an inch down from insulation and twist them together. Then connect ignition on/off the wire to the battery wire and you’ll see that the lights came on and the electrical parts started working.
How often should you insert and remove the ignition key?
You may insert and remove the ignition key thousands of times every year, wearing the key and tumblers ever-so-slightly every time. Heavy keychains can add more stress to the ignition cylinder, increasing wear. After a while, the key may fall out of the cylinder or be unable to turn out of the lock position.
How to test ignition switch with test light?
Connect a test light to the ground side of source. Here is what you should get: Key off Brown, Pink and Purple dead Key counterclockwise Acc. Power to Brown wire only Key in run mode Power to Brown and Pink Key in crank mode Power to Pink and Purple If any of these fail, please verify that the plug was wired correctly.
What does the first position of the ignition switch do?
The ignition switch has several positions that power on different systems as the key is turned. Most ignition switches will activate the electrical accessories on the first position, power on the fuel and ignition systems on the second position, and crank the engine on the third.
What are the symptoms of an ignition switch failure?
Careful car owners can recognize the symptoms of ignition switch failure before the problem leaves them stranded on the side of the road. An ignition switch performs several functions for a vehicle.
What does the ACC position on the ignition switch mean?
When the key is inserted and turned to the “acc” position the ignition switch should power on the the vehicle’s accessories, such as the interior lights and center console. If when they key is inserted and turned, the accessories do not power on, then that may be a sign of an issue with the ignition switch, or lock cylinder.