What is a choke cable on a motorcycle?
A choke valve/cable is designed to restrict the flow of air in the carburettor of an engine. This helps enrich the fuel-air mixture, improving the ability to start an engine in low temperature conditions. Simply put, the choke is about making more fuel available for the engine to use.
Where is the choke on a quad?
The choke is located before the throttle, and manages the total amount of air going into the engine. The choke is only used when starting a cold engine. When doing a cold start, the choke should be closed to limit the amount of air going in.
What’s the best way to remove a choke cable?
The ideal way to loosen it is with a pair of needle nose pliers that will give you better access. Loosen the boot to give you access to the jet. Remove the jet by using your screwdriver to unscrew it. Now you’ll be able to pull the whole assembly, including the boot and the jet, away from the engine.
What’s the best way to remove the Chuck from a drill?
Apply a hammer. Hammer the chuck removal tool until the chuck comes off of the spindle. That’s it! This is very easy with the chuck removal tool, and virtually impossible without one. Without a chuck removal tool, the chuck and spindle will probably have to be removed from the drill. [Back to top]
Where is the choke control on a motorcycle?
Go to the front of the motorcycle and see where the choke control is on the handlebars. At the back of it you’ll see an adjuster. This allows you to alter the tension of the cable.
How does the choke cable affect the carburetor?
The choke cable determines how much fuel flows into the carburetor. You need a rich mix when you start and this will become leaner as the engine warms. Over time, the choke cable might stretch or even break.
Why do I need to remove choke cable?
The choke cable determines how much fuel flows into the carburetor. You need a rich mix when you start and this will become leaner as the engine warms. Over time, the choke cable might stretch or even break. When this happens, you need to remove it and fit a new one.
Where does the choke Cable go on a motorcycle?
You need to have the motorcycle secure in order to remove the choke cable. To do this, you should put it on a lift. Failing that, you can also use a motorcycle jack or even just have it on the kickstand, although you won’t find it as stable. The choke cable runs from the handlebars of the motorcycle into the engine, specifically to the carburetor.
Can a stuck choke tube be used on a bench?
Although the choke may be damaged during removal, careful use of this tool should not harm the barrel. Although the Stuck ChokeTube RemovalTool can be used in the field, it is intended to be a bench tool.
The choke cable determines how much fuel flows into the carburetor. You need a rich mix when you start and this will become leaner as the engine warms. Over time, the choke cable might stretch or even break.