How do you close the Diagnostic Code on a Harley Davidson?

This is a modal window. This modal can be closed by pressing the Escape key or activating the close button. This is a modal window. This modal can be closed by pressing the Escape key or activating the close button. The Twin Cam allows us to see the Harley error codes also known as the diagnostic trouble codes.

Why are the turn signals on my Harley Davidson not working?

I’m not getting any power to the right side turn signals, the green arrow on the dash don’t light up on right, and turn signals are very dim and slow on left side. Wiring seems to check out, fuses ok.

How do you clear a DTC on a Harley Davidson?

Record the codes. If DTCs are not to be cleared, Press and release the odometer reset button. Part number of module will be displayed. NOTE: To determine if a code is current or historic, clear the displayed code by pushing in and holding the odometer reset button ( longer than 5 seconds) until ‘clear’ comes up. Release the odometer reset button.

How do you change the odometer on a Harley Davidson?

With a push button fob, press the left turn signal three times, then the key fob twice, and the PIN will appear. Figure 4. Harley Davidson odometer display. This is also the process to change the PIN code, but be sure to write it down somewhere or use a familiar number before you start.

Why do the Lights Come On on my Harley Davidson?

Believe it or not, sometimes lights that come on do so because of a code that has to work itself out of the system, like after you go a certain number of miles, or after your engine has been started a certain number of times.

Navigation