Why is my bike having a hard time starting?
One potential issue that might be keeping your motorcycle from starting up is a clogged petcock. The petcock is a fuel control valve. It controls the gas flow between off, on, and reserve settings. Clogged petcocks are a common issue that riders often bring up in forums.
What to do when your electric bike won’t turn on?
Reinstall the battery, making sure it is properly mounted. Place the notch on the battery into the upper port in the frame, then place the contact port of the battery onto the contacts on the frame. Lock the battery in place. You will need your battery key. Turn the system off. Remove the battery from the frame.
How to find out if your ebike battery is bad?
UNPLUG RED/BLACK PLUG LOOK AT THE INSIDE OF THE RED/BLACK PLUG TO MAKE SURE THE METAL TABS HAVE NOT PULLED OUT. 3. BATTERY HAS BEEN DRAINED TO UNSAFE LEVELS TEST THE BATTERY WITH THE CELL CHECKER, or USE A MULTI-METER TO DETERMINE BATTERY VOLTAGE AT RED/BLACK PLUG.
What should I do if my motorcycle battery wont start?
If the reading says anything close to or slightly below 12 volts, charge your battery and try starting your motorcycle again. If it has a really low number, such as 9 volts or below, then you battery is pretty much toast and you’ll need to purchase a new one.
What does it mean when your bike won’t start?
Has fuel, battery was enough to turn starter which usually means there’s enough to fire the ignition if bump-started, spark plug lead is firmly connected, compression seems to exist from the rhythm of the starter and how the rear wheel locked if bumped on the slightly loose surface outside the garage in too low a gear…
If you don’t see these symptoms or are otherwise unsure what to look for, the first step is ensuring that the battery is operational and providing the maximum voltage. To confirm your battery is still good, you should visually inspect it, check the voltage, and load test the battery. A visual battery inspection should involve:
How can I tell if my motorcycle battery is good?
Now push the start button and watch what the voltage drops to. It doesn’t matter if the bike starts or not, what you’re looking for is a voltage reading. A healthy 12 volt motorcycle battery should maintain a range from 9.5 – 10.5 volts under the load for a good 30 seconds straight.
What’s the problem with my bike not starting?
Bike won’t start, battery is fine I just joined the sight because I really need some help. I am a first time owner and have a 2005 Suzuki GSX600F Katana with 12,000 miles. It has been good to me besides recently. I started it up a few days ago, went to put it in first gear from neutral and it shut off. It would not start up there after.
How do you test an electric bike battery?
If you have a meter, you can test the pack after it comes off the charger, taking it out of the Ejoe and applying the test probes to the battery pins. A new 48V pack will read 54.6V and a 36V pack will read 42.0V.