Is there any power to the ignition switch?
The engine will turn when I skip the solenoid, but I still get no lights or click. Brian : Ok, if there is power to the main fuse you next need to check for power at the ignition switch. Customer: I checked with the continuity tester….but got nothing. Is there a specific wire you want me to look for. I focused mostly on the red. Brian :
How do you repair an ignition source on a motorcycle?
Put the cleaned and stripped two wires in the crimp and crush them together with some vice grip pliers. Then insulate the repair with heat shrink tubing. Ignition Source Coils. These are coils, under or around the flywheel, that supply energy for the ignition. Usually, almost always, these coils are grounded.
What happens if there is no power to the ignition?
Brian : If there is not power to the ignition switch then you are looking for a short, or damaged wire between the fuse & the switch right there in the main harness & I would not be surprised if it is just a corroded connector. Brian : On a 30 year old bike anything is possible.
How does the electrical system work on a motorcycle?
The electrical components on the bike will only draw the powerr they need from the battery. The battery will not “Over Power” the components as long as the it is of the correct voltage. If you leave the old, dead battery in the system, it will try to pull power from the bigger battery.
Where can I get a motorcycle ignition switch?
Power up your next customization or replace failing parts with our collection of motorcycle ignition switch models at great prices direct from J&P Cycles. Gear up with a custom motorcycle ignition switch for your bike and add style in the process with unique designs that stand out.
What kind of ignition switch do I need for a Harley Davidson?
If you are looking for a looking for a 6-post ignition switch for your Harley Davidson® FLH, we have them. If you are building a custom bike and you want a simple three pole keyed motorcycle ignition switch, we have those too.
What makes a motorcycle ignition switch go bad?
Time, friction, water, and rust could have taken their toll on your factory motorcycle ignition switch. Your upgraded motorcycle ignition starter switch needs to be precision made to withstand years of friction from the key going in and out, plus endure harsh elements from bad weather.
What kind of ignition switch does lowbrow customs use?
Lowbrow Customs also carries bolt-on and weld-on ignition mounting tabs. Perfect for motorcycle ignition key switch relocation jobs where you need to move the switch. If you are building a custom bike or just replacing a worn-out OEM ignition switch, we have the parts you need.