What to do if your fuse panel is not working?
If those fuses are okay, check the smaller spade-type fuses in the inside fuse box the same way, and try to determine which fuses are dead and which ones do have twelve volts. Do that with the ignition switch in the “run” position. Based on your findings, I will look at the diagram for your engine and see what the dead fuses have in common.
How to test a no power ignition switch?
A $10 test light from an auto parts store is what you need. Hook it to the negative post on the battery and turn on the key- your small wire to the solenoid should have power- touch the tip of the test light to the terminal and it should light up.
Why is there no power when the key is turned?
When that dead/dying battery was in place, the lights would power on dimly while the key was on, and I would hear a clicking sound while trying to start it, but it would not turn over. The battery was tested and needed to be replaced. Now, with a new battery that has been tested to be good, I don’t get any electrical power when turning the key.
Why is my aux battery not getting power?
If your having problems with your aux battery switch not getting power, check this out before going to a shop. If your having problems with your aux battery switch not getting power, check this out before going to a shop. Skip navigation Sign in Search Loading… Close This video is unavailable. RV Auxiliary battery switch not getting power?
If those fuses are okay, check the smaller spade-type fuses in the inside fuse box the same way, and try to determine which fuses are dead and which ones do have twelve volts. Do that with the ignition switch in the “run” position. Based on your findings, I will look at the diagram for your engine and see what the dead fuses have in common.
What to do if there is no power to ignition switch?
If it does it’s probably your relay. You are aware that there is two fuse blocks for the ignition. If there is no power to either fuse block i would buy another ignition switch (you can always take it back).. and if still nothing i would replace the harness.. hope i could help. oh one other thing check the ignition module.
When that dead/dying battery was in place, the lights would power on dimly while the key was on, and I would hear a clicking sound while trying to start it, but it would not turn over. The battery was tested and needed to be replaced. Now, with a new battery that has been tested to be good, I don’t get any electrical power when turning the key.
Can a fuse be turned off with zero volts?
If you find twelve volts on both test points, that fuse is good. If you find zero volts on both sides, that circuit is turned off. You are looking for any fuse that has twelve volts on one test point and zero volts on the other one.
What should I do if my headlight light is not working?
The best way to do this is to turn the headlight switch on, connect the negative lead on your meter to a known good ground, and touch the positive lead to each headlight connector terminal. One of the terminals should show battery voltage, and the other two should show nothing if the problem is burned out bulbs.
If you find twelve volts on both test points, that fuse is good. If you find zero volts on both sides, that circuit is turned off. You are looking for any fuse that has twelve volts on one test point and zero volts on the other one.
Why are my headlights not working in high beam?
If just one bulb fails to work in either high beam mode or low beam mode, it may be the bulb. Most headlight failures that are limited to just high or low beams are related to a relay or the high beam control switch.
What to do when both head lights stop working at the same time?
When that happens, the operational lifespan of your headlight capsule will be severely compromised, and the only fix is to replace the headlight assembly. When both headlights stop working at the same time, the bulbs usually aren’t at fault.
Why is my passenger side headlight not working?
Passenger side headlight not working. Not open for further replies. Over the winter, the passenger side headlight just stopped working. Naturally, I changed the bulb and nothing. The it dawned on me that neither high nor low beam were working, so I thought it may possible be a ground issue.
What happens when a fuse box comes out?
If any of the fuses fall out or easily come loose then that may be a sign that the some of the panel’s terminals may be damaged. A damaged terminal with a loose fuse may cause electrical problems such as sudden, intermittent power loss to certain accessories or lights. 3. Burned fuses or terminals
Can a loose fuse cause a power loss?
If any of the fuses fall out or easily come loose then that may be a sign that the some of the panel’s terminals may be damaged. A damaged terminal with a loose fuse may cause electrical problems such as sudden, intermittent power loss to certain accessories or lights.
If it does it’s probably your relay. You are aware that there is two fuse blocks for the ignition. If there is no power to either fuse block i would buy another ignition switch (you can always take it back).. and if still nothing i would replace the harness.. hope i could help. oh one other thing check the ignition module.
What does no power to the fuse panel mean?
No Power to the Fuse Panel: Not Getting any Power to the Fuse Not getting any power to the fuse panel. It is the box inside the car. I think its a 3.3c.U. have the same problem? The fuses inside are fed, in groups, from the larger fuses under the hood, so check those first.
Where are the fuses on a silveradosierra?
No power from about half of the fuses located on the side of the drivers-side dash. No blown fuses. I pulled the main fuse panel under the hood (thinking that it feeds the smaller panel on the dash), checked for power- all are good. Cleaned and reattached the main battery ground with no effect.
Where are the fuses on a 1998 Chevy 1500?
1998 Chevy 1500 5.7L 4×4. No power from about half of the fuses located on the side of the drivers-side dash. No blown fuses. I pulled the main fuse panel under the hood (thinking that it feeds the smaller panel on the dash), checked for power- all are good.
What to do if your alternator fuse is blown?
Check the fuses in the underhood fuse box. There are also some fuses there that are bigger and square with a clear prastic top. Check those with a flashlight. Shine it inside it and see if the fuse is blown. No worries, I’ve been out all day until now. So I think we got something. The 100a fuse for the alternator was melted]