How do you drain fuel from a Vespa?
Disconnect the fuel inlet at the carb, put it in a plastic jug. Disconnect the petcock vacuum line at the carb (trace it from the petcock back), and suck on it with your mouth. Create suction and block the line with your tongue. Tank will drain in under a minute.
When did the Vespa Sprint Veloce come out?
The Vespa Sprint was successor to the G.L. It had a similar layout and design, but had updated styling that matched the other contemporaneous largeframe Vespas. The scooter came in two different versions. Early models, called the Vespa Sprint, were made until 1968. Later models, called the Vespa Sprint Veloce, were made beginning in 1969.
What kind of gas do you put in a Vespa?
Your Vespa may or may not arrive with pre-mixed gas / oil mix in the fuel tank. Take a look in the gas tank, and see if there is any remaining from our road testing. If there is no sign of gas in the tank, you need to make your gas and oil mix. EXAMPLE – 1 USA GALLON UNLEADED GAS needs just under 100ML of two stroke oil mixed into it, mix well.
Where is the idle mixture on a Vespa?
Black Spark Plug: Too rich, White: too lean, Tan: just right! This is for the main jet setting only. The idle mixture is on the rear of the carburetor, this adjusts the mixture at idle and 1/8 throttle opening. Most bikes will be within 1.5 to 3 turns out, set this after the bike warms up by adjusting it in and out to find the highest idle rpm.
What does the front badge on a sprint Vespa mean?
The front legshield badge simply said “Vespa” in a block font. The rear aluminum badge was square shaped, and said “150 Sprint V,” with a black background. The “Piaggio” badge was also changed to an octagonal shape. In Europe, the Sprint’s headset was the same trapezoid headlight model that was used on the G.L. and Super Sport.
The Vespa Sprint was successor to the G.L. It had a similar layout and design, but had updated styling that matched the other contemporaneous largeframe Vespas. The scooter came in two different versions. Early models, called the Vespa Sprint, were made until 1968. Later models, called the Vespa Sprint Veloce, were made beginning in 1969.
Your Vespa may or may not arrive with pre-mixed gas / oil mix in the fuel tank. Take a look in the gas tank, and see if there is any remaining from our road testing. If there is no sign of gas in the tank, you need to make your gas and oil mix. EXAMPLE – 1 USA GALLON UNLEADED GAS needs just under 100ML of two stroke oil mixed into it, mix well.
What kind of engine does a 1965 Vespa have?
1963 Vespa GL150, Vespa GL150 “Shifty” with Pinasco 177cc Cylinder Kit, PM Tuning pipe, Expansion Chamber and 24/24 Carb. Runs top notch, 1st kick sta… This is an original 1965 Vespa 150 All State.
Black Spark Plug: Too rich, White: too lean, Tan: just right! This is for the main jet setting only. The idle mixture is on the rear of the carburetor, this adjusts the mixture at idle and 1/8 throttle opening. Most bikes will be within 1.5 to 3 turns out, set this after the bike warms up by adjusting it in and out to find the highest idle rpm.