How fast will the Polaris Ranger 570 go?
about 40 MPH
This machine is powerful up to about 40 MPH, which is plenty fast in the bush where we ride it.
Why is my fuel pump not working on my Polaris 570?
Your test of moving your ECU to a “good” Rzr and having the problem persist would indicate that your ECU is damaged alright. My 570 was showing identical problems (fuel pump would intermittently not run when turning the key on and would stop randomly killing the engine).
What do you need to test a Polaris Ranger relay?
To test the relay you will need a 12vdc power supply and a continuity tester of some sort (I use a digital Voltmeter). The diagram in the service manual shows the relay as if looking from the top. Just remember if you flip it over, the pins are changed to the opposite side.
Where does fuel pump go in Polaris rzr800?
On the RZR800 the RD/BL wire goes from pin 3 at fuel pump CONECTOR to terminal A4 on the RELAY/FUSE BLOCK.It does NOT go to the ECU. Click to expand… He was probably using a meter to check continuity and assumed it went to the ECU. I am betting he was seeing resistance through the coil of the relay.
What are the pin numbers on a Polaris Ranger?
When you do this, you should hear the relay click and there will be continuity between pin 87 and 30. (The pin numbers shown in the service manual is pretty much standard across the board for electrical diagrams.)
Your test of moving your ECU to a “good” Rzr and having the problem persist would indicate that your ECU is damaged alright. My 570 was showing identical problems (fuel pump would intermittently not run when turning the key on and would stop randomly killing the engine).
To test the relay you will need a 12vdc power supply and a continuity tester of some sort (I use a digital Voltmeter). The diagram in the service manual shows the relay as if looking from the top. Just remember if you flip it over, the pins are changed to the opposite side.
How do you change fuel line clamps on Polaris Ranger?
Once you have the seat off, turn on the key and you will hear the pump run for a few seconds. The hose from the tank to the pump is where her problems were. It might be a good idea to just go ahead and get two fuel line clamps and change them out since they are easy to get to and you will be there anyway.
Where does the fuel pump go on a Polaris Ranger?
Click to expand… If you pull the seat, the fuel pump mounts to the frame for the seat on the front . The hose comes from the tank to the pump then the inline filter then to the driver side to the carb. It is a black hose that is about 1/4 inch I.D. The fuel pump will have two wires to it.