How do you change the PIN code on an odometer?
This is also the process to change the PIN code, but be sure to write it down somewhere or use a familiar number before you start. You can change the numbers in the odometer by clicking the left button, and enter it with the right or by clicking the key fob twice, depending on the system. Entering a number moves you to the next number.
How do you change the PIN code on a Harley Davidson?
Harley Davidson odometer display. This is also the process to change the PIN code, but be sure to write it down somewhere or use a familiar number before you start. You can change the numbers in the odometer by clicking the left button, and enter it with the right or by clicking the key fob twice, depending on the system.
Where do I enter the 5 digit code on my Ford?
Using the Owner’s Manual Look for the factory code. Enter the factory code. Press the first two digits. Enter your new 5-digit code. Once you’ve received the lock/unlock signal, enter your new 5-digit personal code within within five seconds. Wait for confirmation.
Where is the second digit in a Harley Davidson pin?
Increment the second digit using the left turn switch until the digit reaches the second digit of the PIN. The second digit in the odometer will be the second digit in the PIN. Press right turn switch 1 time. The second digit is stored and the next dash will flash.
What is the PIN code on a Harley Davidson?
Harley puts a standard factory preset PIN code and it is usually 31313. Yup, I could actually sit on your Harley Davidson, start it, and ride off without the key fob present. But don’t worry, I would never do that to a fellow biker.
This is also the process to change the PIN code, but be sure to write it down somewhere or use a familiar number before you start. You can change the numbers in the odometer by clicking the left button, and enter it with the right or by clicking the key fob twice, depending on the system. Entering a number moves you to the next number.
How to set pin override code for HD security system?
If you haven’t set your own PIN override code for your HD security alarm system…do it now! 1. Select 5 digit code ( each digit being a 1 thru 9) and record it on the wallet card in the owners manual. 2. With an assigned FOB present, turn IGN key ON with the handlebar kill switch in the OFF position
What happens if you don’t put your FOB in transport mode?
If you don’t put it in transport mode then the alarm activated by motion detection can discharge the battery, as the signals will keep activating over and over. Transport mode allows the vehicle to be picked up and moved in an armed state, however, any attempt to start the engine when the fob is not within range will trigger the alarm.