What should I do before working on the underside of an engine?
Don’t leave rags moistened with gas lying about either as they could possibly ignite. Remove the spark plug or disconnect the lead. Before working on the underside of an engine, make sure the controls are all off, that the spark plug lead is disconnected, and that the engine has cooled down (if you were previously able to get it started).
Why does my starter make a grinding noise?
Either the gear has stripped or has become, dislodged against the flywheel. A worn starter drive gear not making proper contact with the flywheel, could make this noise. This is similar to the one that is heard if you start your engine and then, accidentally restart it. However, grinding may also happen, inside the starting motor.
What is the objective of the starter motor?
The objective of the starting motor is to rotate the engine between 85 and 150 rpm’s. Basically There Are Two Main Parts In Every Starter; The primary motor; that turns your crankshaft and starts your engine.
How to diagnose a car starter motor problem?
When Diagnosing starter motor problems; always start with the battery. For the starter motor to work; make sure that your car battery is in excellent working condition and fully charged. Starter motors are used to rotate an engine to begin the starting process.
What should I do if my starter is grinding?
Put a 1/8″ drill bit between the flywheel teeth and the starter shaft. If it’s too tight, add shims till it clears. If it’s too loose, remove shims. (You must log in or sign up to reply here.)
Why does my car starter Grind when I crank?
A bad battery is not going to cause grinding but it could cause a slow rotation of the motor or starter that will sound real bad. If the starter is turning the motor over real fast I would not worry about the battery. Or you could have the battery load tested.
The objective of the starting motor is to rotate the engine between 85 and 150 rpm’s. Basically There Are Two Main Parts In Every Starter; The primary motor; that turns your crankshaft and starts your engine.
When Diagnosing starter motor problems; always start with the battery. For the starter motor to work; make sure that your car battery is in excellent working condition and fully charged. Starter motors are used to rotate an engine to begin the starting process.