How to troubleshoot an electric motorcycle starter system?
If the starting system isn’t functioning correctly troubleshoot the whole circuit and not just the main components. When inspecting an electric starting system be sure to start with a battery that is fully charged. Locate the starter relay. Attempt to start the engine and listen to the starter relay. The starter relay should click.
What should I do if my starter relay doesn’t click?
The starter relay should click. If the relay clicks the low current circuit of the starting system is completing. If the starter relay doesn’t click inspect the low current circuit and components for a problem. Almost all starter relays can be tested in the same manner.
How does a high current starter system work?
The high current circuit is controlled by the low current circuit. The low current circuit uses smaller wires, usually 16 to 12 gauge. The central components of this circuit are the battery, main/ignition switch, engine start switch, fuse, and coil winding inside of the starter relay.
How to troubleshoot basic electrical problems on a riding car?
Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred. Please try again later. (Playback ID: srV05bweOtGVd0Ku) An error occurred while retrieving sharing information. Please try again later.
What does it mean when your bike won’t start?
It would not start up there after. The battery is fine, tested and it is at peak power. Lights are working, dash lights working, but the engine will not turn over or even make a sound when I try to start it up now.
What should I do if my motorcycle battery wont start?
If you don’t see these symptoms or are otherwise unsure what to look for, the first step is ensuring that the battery is operational and providing the maximum voltage. To confirm your battery is still good, you should visually inspect it, check the voltage, and load test the battery. A visual battery inspection should involve:
How to start a Harley Davidson that wont start?
Insert 1 wire into the female terminal that would be #30 in the fuse panel socket. Insert the other WIRE (NOT END of 1st wire) into #87 of the fuse panel socket. 6) Make SURE bike is in NEUTRAL. 7) Turn on ignition ON and Kill switch to run. When you touch both of your installed wires together DOES bike crank./start? Click to expand…
Why is my starter not working on my motorcycle?
Check for a poor connection in the heavy gauge wires between the battery and starter relay, and the starter relay and the starter motor. The problem could lie with the starter motor if the high current wires and connections check out.
If you don’t see these symptoms or are otherwise unsure what to look for, the first step is ensuring that the battery is operational and providing the maximum voltage. To confirm your battery is still good, you should visually inspect it, check the voltage, and load test the battery. A visual battery inspection should involve:
What does it mean when your bike wont start?
Because when it happened there was no smell or sound of a fried wire as such. Basically the bike had been stood for a while so the battery had no charge anyway. Then i wire up the leads (dont turn the car off) keep them connected and try to start it and then I think everything just stopped working.
Why are there no lights on my bike?
Now when I turn the key there are no lights or anything. I have checked main fuse which is fine, I hope I have blown the battery and nothing else. Question is what are the other possibilities that could be the result of this? Click to expand… Hook jumper leads up to the car battery again and see if you get lights.
What should I look for when starting an electric motorcycle?
When inspecting an electric starting system be sure to start with a battery that is fully charged. Locate the starter relay. Attempt to start the engine and listen to the starter relay. The starter relay should click. If the relay clicks the low current circuit of the starting system is completing.
What causes a car starter to not start?
Most starter problems occur in predictable places, and diagnostics are easy to run. When your car fails to start, it could be because of a damaged starter component. It can also be a poor electrical connection or insufficient power. It starts the internal combustion of your engine.
What happens when the starter relay is on?
When the starter relay is on, the starter rotor will start to move firing up the engine. The first thing you must check is if your battery has enough voltage to power up your car’s engine.
Why does my scooter not start when I press the starter button?
Checking the Starter: If the scooter won’t engage the starter when you press the button, it’s probably due to a bad fuse, or problem with the actual starter motor. In this case, you’ll want to inspect the fuses next to the relay or CDI.
How does the starter motor work on a car?
It starts the internal combustion of your engine. When the battery powers up after an ignition, electric current goes to the starter motor. In the starter motor, pinions move the engine.
What should I do if my starter is not working?
The starter pinion gear engages this wheel to make your car engine crank. Remove the starter motor and set your transmission gear to neutral. Rotate the crankshaft manually using a ratchet. There is a pulley at the front or bottom of your engine block. The pulley should move as you watch how the pion gears are reacting.
When the starter relay is on, the starter rotor will start to move firing up the engine. The first thing you must check is if your battery has enough voltage to power up your car’s engine.
If the starting system isn’t functioning correctly troubleshoot the whole circuit and not just the main components. When inspecting an electric starting system be sure to start with a battery that is fully charged. Locate the starter relay. Attempt to start the engine and listen to the starter relay. The starter relay should click.
What should I do if my motorcycle won’t start?
How to fix it: There is only one fuse that can affect the starting of a motorcycle. Every motorcycle usually has a main fuse which is between 30 to 50 amps (occasionally some bikes will have 20 amps). It is usually located off of the positive battery wire.
When inspecting an electric starting system be sure to start with a battery that is fully charged. Locate the starter relay. Attempt to start the engine and listen to the starter relay. The starter relay should click. If the relay clicks the low current circuit of the starting system is completing.
What makes up the high current circuit on a motorcycle starter?
The 6 to 8 gauge wires that connect the positive battery terminal to the starter relay and the starter relay to the starter motor make up the high current circuit along with the high current contacts in the starter relay. The high current circuit is controlled by the low current circuit.
Why does my bike starter keep clicking repeatedly?
Anyway I came back to the house and hooked my battery charger straight to the power and ground battery cables on the bike and set it to the 50 amp position on the charger for starting and gave it a go. Still same thing charger just clicks repeatedly. It has the power for sure because that charger can start a car.
What to do if your starter doesn’t click?
If the the starter still clicks, clean ALL the battery cables and try again. This includes the Positive at the battery and the starter. The negative (ground) at the battery and the ground point. Also check ground strap from engine to frame. If it still clicks, disconnect the battery.
Why does my bike not start when I Turn on the ignition?
If okay, check that the switch is getting power from the ignition switch when the ignition switch is turned on. If not, your ignition switch may be faulty at the lead that supplies power to the starter switch and is probably the culprit because we know the ignition circuit works – it’s the starter circuit in question.
If the the starter still clicks, clean ALL the battery cables and try again. This includes the Positive at the battery and the starter. The negative (ground) at the battery and the ground point. Also check ground strap from engine to frame. If it still clicks, disconnect the battery.
Anyway I came back to the house and hooked my battery charger straight to the power and ground battery cables on the bike and set it to the 50 amp position on the charger for starting and gave it a go. Still same thing charger just clicks repeatedly. It has the power for sure because that charger can start a car.
Is there a problem with my electric bike Charger?
The light on the transformer just stays green. It’s only been its 10th charge I’d say. The battery was lasting perfectly. First problem but its a big one!
Can a faulty solenoid cause a car to not start?
It can lead to shorting or mechanical failure of the affected parts. The starter solenoid is just one of the components of a starter system. While a problem with starting the engine may be as a result of it being damaged, it’s not always the case, and learning how to diagnose a faulty one is important.
When do I need to replace my starter solenoid?
Major damages, especially the ones involving the inside of a starter solenoid may warrant its total replacement. Before making final diagnoses that your starter solenoid is the one causing starter failures or any other problem with starting the car, you would need to test it.
Why does my car say it has a bad starter solenoid?
Problems that might cause your car to act like it has a bad starter solenoid can include: Bad battery – If the battery voltage is low it will be unable to provide enough power to start your engine. Blown fuse – Sometimes the simplest explanation is the best one. A blown fuse in the starter circuit could be the cause of a no-start problem.
Can a blown fuse cause a starter to not start?
Blown fuse – Sometimes the simplest explanation is the best one. A blown fuse in the starter circuit could be the cause of a no-start problem. Broken or corroded wiring – Damaged or dirty wires to the battery or to the starter solenoid (or wires that are loose) can prevent sufficient power from reaching the starter.
If the reading stays steady, your battery is good to go—and your motorcycle likely has another problem (or a few problems). Fortunately, there are other troubleshooting means that can help determine why your bike won’t start.
What are the signs of a bad starter relay?
Broken or corroded wiring – Damaged or dirty wires to the battery or to the starter solenoid (or wires that are loose) can prevent sufficient power from reaching the starter. Alternator – The alternator is designed to power all of your car’s electrical systems when the vehicle is running. It also recharges the battery.