What is the F1 code on a Suzuki GSXR 1000?
Click to expand… This is weird, after riding my 2002 GSXR-1000 over 19,000 miles I get the F1 code C46. I follow the directions according to the link which the white connection was still plugged up to the Servo and splice the other two wires B/R & R/B. Code is gone which I tested this after for over 1 hour.
What is the c00 code on a 2005 GSXR1000?
On 2005 GSXR1000 when I install the jumper I get the C00 code. How do I get rid of the F1 and light if nothing is wrong?Looked through everything listed and I did not see anything about it.
Why does my Suzuki GSXR not have Fi?
Turned the key ON, turned the run bttn ON and started the engine. FI was blinking. Turned the run OFF,then back ON, hit the start an the FI was gone. This second time I could actually hear a quick mute in the exhaust, caused for the complete valve closure.
Where is the dealer mode switch on a Suzuki GSXR?
Location of dealer mode switch and how to get the codes. The dealer mode connector is under the tail cowling on the left side of the bike, near the regulator/rectifier. It will have only two wires going to it.
Click to expand… This is weird, after riding my 2002 GSXR-1000 over 19,000 miles I get the F1 code C46. I follow the directions according to the link which the white connection was still plugged up to the Servo and splice the other two wires B/R & R/B. Code is gone which I tested this after for over 1 hour.
On 2005 GSXR1000 when I install the jumper I get the C00 code. How do I get rid of the F1 and light if nothing is wrong?Looked through everything listed and I did not see anything about it.
Why does my Suzuki GSXR have a Fi warning?
Originally when the full exhaust Yosh RS-3 was installed all was done was the black/brown wire from the ECU input will prevent that “Fi” warning message from appearing in your instrument panel. That was the only wire cut, that’s it.
Location of dealer mode switch and how to get the codes. The dealer mode connector is under the tail cowling on the left side of the bike, near the regulator/rectifier. It will have only two wires going to it.
What should the sprig be on a Suzuki GSXR?
After will be able to notice that they effect the way the fork or shock perform. One of the problems with stock springs is, in most cases, it is of a progressive rate. be 1.05 kg per mm, getting progressively stiffer. The ideal solution is to install a sprig with a straight rate, specific for your weight, and the weight of your motorcycle.
What does Fi mean on Suzuki GSXR 2006?
After riding over 10,000 miles on my 2006 750, FI started to show instead of temperature… (only) sometimes. Took it to dealer who said it needed to adjust exhaust valve (the wires) – as the error was shown because the valve did not fully close. 8,000 more miles since then and no problem. ..
What does the display 14 indicate on Suzuki GSX-R 1000?
The display 14 indicates “fi” and the coolant temperature alternately, and the red indicator light 13 comes on and remains lit. The engine may continue to run in this mode. The display 14 indicates “fi” continuously and the red indicator light 13 blinks while cranking the engine. The engine will not run in this mode.
How to change engine rpm on Suzuki GSX are 1000?
Push the adj button 2 to change preset rpm from 5000 r/ min to 10000 r/min step 500 r/min and from 1 0000 r/min to 13750 r/ min step 250 r/min. Push the sel button 10 to fix the selected setting. The engine rpm indicator system holds the selected settings when the ignition switch is turned off.
When does no light mode go off on Suzuki GSX are 1000?
When the sel button 10 is pushed with no light mode, the indicator goes off selection mode. The indicator goes off selection mode when the motorcycle speed exceeds 1 0 km/ h (6 mph). Push the sel button 10 and brightness indicator comes on in odometer/trip meter area.
How to reset the trip meter on a Suzuki GSX R?
To reset a trip meter to zero, push the adj button 2 For two seconds while the display indicates the trip meter, 1 or 2, you want to reset. The reserve trip meter counts distance from fuel tank reserve point until the fuel tank is refilled.